+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €0.84 per piece.
KLT
6305 2RS · 25 × 62 × 17

Deep groove ball · 6305 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6305 2RS: ⌀25 × ⌀62 × 17 mm6305 2RS2RS
    Fig. 1: 6305 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm
    Bearing KLT 6305 2RS — photo 1
    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing KLT 6305 2RS

    €1.02per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    14 exact, 59 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    17 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    m
    0.23 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 25 × 62 × 17 from other brands

    74 products
    Photo: 6305 2RS
    You are viewingKLT 6305 2RS
    €1.02baseline for the price comparison

    Everything the number specifies matches: series 63, 25 × 62 × 17 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the KLT catalogue.

    • Photo: 6305 2RS6305 2RSThis bearingKLT25 × 62 × 17available to order€1.02you are here
    • Series illustration (not a photo of this item): 6305 2RS6305 2RSCT25 × 62 × 1711,738 pcs€1−€0.02
    • Series illustration (not a photo of this item): 6305 2NSE6305 2NSENACHI25 × 62 × 1731 pcs€4.85+€3.83
    • Photo: 6305 2RSR6305 2RSRFAG25 × 62 × 1780 pcs€5.74+€4.72
    • Series illustration (not a photo of this item): 6305 2RS6305 2RSKoyo25 × 62 × 17150 pcs€5.83+€4.81
    • Series illustration (not a photo of this item): 6305 2RS6305 2RSNTE25 × 62 × 17available to order€1.67+€0.65
    • Photo: 6305 2RS6305 2RSZ&S25 × 62 × 17available to order€3.05+€2.03
    • Photo: 6305 2RS6305 2RSNEU25 × 62 × 17available to order€5.81+€4.79
    • Series illustration (not a photo of this item): 6305-2RS16305-2RS1SKF25 × 62 × 17available to order€6.56+€5.54
    • Photo: 6305 2RS6305 2RSTIMKEN25 × 62 × 17available to order€10.13+€9.11

    Under the price: the difference from the price of this bearing (€1.02).
    02

    Often bought with this

    shaft snap ring Ø25, bore snap ring Ø62, seal 25×62

    5 products
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    • Seal 25×62JULU 025-62-10 TCWhy it fits: Oil seal 25×62: shaft 25 and housing bore 62, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.39890 pcs
    • Seal 25×62JULU 025-62-7 TCWhy it fits: Oil seal 25×62: shaft 25 and housing bore 62, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.39available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    15 machines2 makesby parts catalogues

    1. KhTZ-16131, KhTZ-16331 KhTZ same geometry 3 assemblies · 4 pcs per machine

      ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: Tractors KhTZ-16131, KhTZ-16331. Operator’s manual 161.00.000 RE

    2. KhTZ-17021, KhTZ-17221 KhTZ same geometry 3 assemblies · 3 pcs per machine

      ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: Tractors KhTZ-17021 and KhTZ-17221. Operator’s manual 170.00.000 RE

    3. KhTZ-242K.20 KhTZ same geometry 3 assemblies · 3 pcs per machine

      ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: Tractor KhTZ-242K.20. Operator’s manual

    4. KhTZ-243K.20 KhTZ same geometry 3 assemblies · 3 pcs per machine

      ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: Tractor KhTZ-243K.20. Operator’s manual

    5. T-150K (KhTZ-150K-09-25) KhTZ same geometry 3 assemblies · 3 pcs per machine

      ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: Tractor KhTZ-150K-09-25. Operator’s manual 151.00.000-09-25 RE

    Number in the manufacturer’s catalogue: by GOST (180305) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 62d 25B 17
    d×D×Bsize 25 × 62 × 17mm
    mweight 0.23kg

    Deep groove ball bearing 6305-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180305.

    M: KLT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180305?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0305 corresponds to the ISO base 6305. Size 25 × 62 × 17 mm, a full equivalent of 6305-2RS.

    Will 6305 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet