+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
KG
N 215 · 75 × 130 × 25

Cylindrical roller · N 215

radial — high
    Drawing of N 215: ⌀75 × ⌀130 × 25 mm⌀130⌀7525N 215
    Fig. 1: N 215, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of N 215

    Load: radial high; no axial loadCylindrical roller N

    Bearing KG N 215

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    2 exact, 11 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    25 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 75 × 130 × 25 from other brands

    13 products
    Series illustration (not a photo of this item): N 215
    You are viewingKG N 215

    Size and design match across the brand catalogues. The codes in the number are read against the KG catalogue.

    • Series illustration (not a photo of this item): N 215N 215This bearingKG75 × 130 × 25available to orderon requestyou are here
    • Series illustration (not a photo of this item): N 215N 215CT75 × 130 × 25available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 75 × 130 × 25mm

    Cylindrical roller N bearing N 215.

    Frequently asked questions

    Will 215 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet