+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
KG
986714 · 70 × 105 × 21

Deep groove ball · 986714

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 986714: ⌀70 × ⌀105 × 21 mm⌀105⌀7021986714
    Fig. 1: 986714, simplified drawing per ISO 8826-1; GOST number, dimensions from the GOST↔ISO table CX p.795. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 986714

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing KG 986714

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    3 exact, 0 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    105 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    21 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 70 × 105 × 21 from other brands

    3 products
    Cross-section drawing to size: Deep groove ball, 70 × 105 × 21 mm
    You are viewingKG 986714

    Everything the number specifies matches: ordinary steel, design without special letters. The codes in the number are read against the KG catalogue.

    • Cross-section drawing to size: Deep groove ball, 70 × 105 × 21 mm986714This bearingKG70 × 105 × 21available to orderon requestyou are here
    • Cross-section drawing to size: Deep groove ball, 70 × 105 × 21 mm986714CT70 × 105 × 21358 pcs€4.67
    • Cross-section drawing to size: Deep groove ball, 70 × 105 × 21 mm986714NTE70 × 105 × 21available to orderon request
    02

    Often bought with this

    seal 70×105, shaft snap ring Ø70, bore snap ring Ø105

    3 products
    • Seal 70×105JULU 070-105-12 TCWhy it fits: Oil seal 70×105: shaft 70 and housing bore 105, the same as the bearing
      €0.62240 pcs
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø105CT SEG 105 W by 100Why it fits: DIN 472 snap ring for a 105 bore: holds the outer ring in the housing
      €51.474 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 105d 70B 21
    d×D×Bsize 70 × 105 × 21mm

    Deep groove ball bearing 986714.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet