+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
KG
6214 2RS · 70 × 125 × 24

Deep groove ball · 6214 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6214 2RS: ⌀70 × ⌀125 × 24 mm6214 2RS2RS
    Fig. 1: 6214 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6214 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing KG 6214 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    6 exact, 22 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    125 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    24 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    63.7 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    45 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    Limiting speed
    7,000 rpm
    Limiting speedMechanical limit; depends on the seal (SKF 6200: 36,000 open, 17,000 with 2RSH). Source: supplier data
    m
    1.1 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 70 × 125 × 24 from other brands

    28 products
    Series illustration (not a photo of this item): 6214 2RS
    You are viewingKG 6214 2RS

    Everything the number specifies matches: series 62, 70 × 125 × 24 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the KG catalogue.

    • Series illustration (not a photo of this item): 6214 2RS6214 2RSThis bearingKG70 × 125 × 24available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6214 2RS6214 2RSCT70 × 125 × 24527 pcs€4.83
    • Photo: 6214 2RS6214 2RSZ&S70 × 125 × 24available to order€14.25
    • Photo: 6214-2RS16214-2RS1SKF70 × 125 × 24available to order€39.23
    • Series illustration (not a photo of this item): 6214 2RS6214 2RSF&D70 × 125 × 24out of stockon request
    • Photo: 6214 2RS6214 2RSSKF70 × 125 × 24out of stockon request
    02

    Often bought with this

    shaft snap ring Ø70, bore snap ring Ø125, seal 70×125

    3 products
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø125CT SEG 125 W by 100Why it fits: DIN 472 snap ring for a 125 bore: holds the outer ring in the housing
      €67.941 pcs
    • Seal 70×125JULU 070-125-10 TCWhy it fits: Oil seal 70×125: shaft 70 and housing bore 125, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.8782 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines2 makesby parts catalogues

    1. KhTZ-2511, KhTZ-3510 KhTZ same geometry 2 assemblies · 3 pcs per machine

      ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    2. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus check the version 1 assembly · 1 pcs per machine

      not set by the number: sealing

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (180214) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 125d 70B 24
    d×D×Bsize 70 × 125 × 24mm
    Cdynamic 63.7kN
    C0static 45kN
    mweight 1.1kg

    Deep groove ball bearing 6214-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180214.

    C, C₀, m and limiting speed 7,000 rpm: KG data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180214?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0214 corresponds to the ISO base 6214. Size 70 × 125 × 24 mm, a full equivalent of 6214-2RS.

    Will 6214 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet