+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
KG
6009 2RS · 45 × 75 × 16

Deep groove ball · 6009 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6009 2RS: ⌀45 × ⌀75 × 16 mm6009 2RS2RS
    Fig. 1: 6009 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6009 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing KG 6009 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    11 exact, 37 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    75 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    16 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    22.1 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    14.6 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    Limiting speed
    12,000 rpm
    Limiting speedMechanical limit; depends on the seal (SKF 6200: 36,000 open, 17,000 with 2RSH). Source: supplier data
    m
    0.24 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 45 × 75 × 16 from other brands

    49 products
    Series illustration (not a photo of this item): 6009 2RS
    You are viewingKG 6009 2RS

    Everything the number specifies matches: series 60, 45 × 75 × 16 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the KG catalogue.

    • Series illustration (not a photo of this item): 6009 2RS6009 2RSThis bearingKG45 × 75 × 16available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6009 2RS6009 2RSCT45 × 75 × 162,878 pcs€1.59
    • Series illustration (not a photo of this item): 6009 2RS6009 2RSNTE45 × 75 × 1680 pcs€2.46
    • Series illustration (not a photo of this item): 6009 2RS6009 2RSKoyo45 × 75 × 1650 pcs€9.37
    • Photo: 6009 2RS6009 2RSKLT45 × 75 × 16available to order€1.40
    • Photo: 6009 2RS6009 2RSZ&S45 × 75 × 16available to order€3.12
    • Photo: 6009 2RS6009 2RSWBF45 × 75 × 16available to order€3.44
    • Photo: 6009-2RS16009-2RS1SKF45 × 75 × 16available to order€10.96
    • Photo: 6009 2RS6009 2RSTIMKEN45 × 75 × 16available to order€11.14
    • Photo: 6009 2RS6009 2RSFAG45 × 75 × 16available to order€16.81
    02

    Often bought with this

    shaft snap ring Ø45, bore snap ring Ø75, seal 45×75

    4 products
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø75CT SEG 75 W by 100Why it fits: DIN 472 snap ring for a 75 bore: holds the outer ring in the housing
      €19.77available to order
    • Seal 45×75JULU 045-75-10 TCWhy it fits: Oil seal 45×75: shaft 45 and housing bore 75, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.50480 pcs
    • Seal 45×75JULU 045-75-8 TCWhy it fits: Oil seal 45×75: shaft 45 and housing bore 75, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.57available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    9 machines3 makesby parts catalogues

    1. KhTZ-17021, KhTZ-17221 KhTZ exactly this number 1 assembly · 1 pcs per machine

      manufacturer’s catalogue: Tractors KhTZ-17021 and KhTZ-17221. Operator’s manual 170.00.000 RE

    2. KhTZ-242K.20 KhTZ exactly this number 1 assembly · 1 pcs per machine

      manufacturer’s catalogue: Tractor KhTZ-242K.20. Operator’s manual

    3. T-150-05-09-25, KhTZ-181 KhTZ exactly this number 1 assembly · 1 pcs per machine

      manufacturer’s catalogue: Tractors T-150-05-09-25 and KhTZ-181. Operator’s manual

    4. T-150K (KhTZ-150K-09-25) KhTZ exactly this number 1 assembly · 1 pcs per machine

      manufacturer’s catalogue: Tractor KhTZ-150K-09-25. Operator’s manual 151.00.000-09-25 RE

    5. T-156B-09-03 (tractor loader) KhTZ exactly this number 1 assembly · 1 pcs per machine

      manufacturer’s catalogue: Tractor loader T-156B-09-03. Operator’s manual

    Number in the manufacturer’s catalogue: by GOST (180109) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 75d 45B 16
    d×D×Bsize 45 × 75 × 16mm
    Cdynamic 22.1kN
    C0static 14.6kN
    mweight 0.24kg

    Deep groove ball bearing 6009-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180109.

    C, C₀, m and limiting speed 12,000 rpm: KG data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180109?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0109 corresponds to the ISO base 6009. Size 45 × 75 × 16 mm, a full equivalent of 6009-2RS.

    Will 6009 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet