+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
KG
6003 ZZ · 17 × 35 × 10

Deep groove ball · 6003 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 6003 ZZ: ⌀17 × ⌀35 × 10 mm6003 ZZZZ
    Fig. 1: 6003 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6003 ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing KG 6003 ZZ

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    10 exact, 38 approximate
    d
    17 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    35 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    10 mm
    Width BRing width. Source: supplier data
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    C
    6.37 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    3.25 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    Limiting speed
    28,000 rpm
    Limiting speedMechanical limit; depends on the seal (SKF 6200: 36,000 open, 17,000 with 2RSH). Source: supplier data
    m
    0.038 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 17 × 35 × 10 from other brands

    49 products
    Series illustration (not a photo of this item): 6003 ZZ
    You are viewingKG 6003 ZZ

    Everything the number specifies matches: series 60, 17 × 35 × 10 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the KG catalogue.

    • Series illustration (not a photo of this item): 6003 ZZ6003 ZZThis bearingKG17 × 35 × 10available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6003 ZZ6003 ZZCT17 × 35 × 1011,764 pcs€0.36
    • Series illustration (not a photo of this item): 6003 ZZ6003 ZZNTE17 × 35 × 10290 pcs€0.54
    • Series illustration (not a photo of this item): 6003 ZZ6003 ZZno brand17 × 35 × 10available to order€0.33
    • Photo: 6003 ZZ6003 ZZZ&S17 × 35 × 10available to order€0.80
    • Photo: 6003 ZZ6003 ZZFKL17 × 35 × 10available to order€2.78
    • Photo: 6003-2Z6003-2ZSKF17 × 35 × 10available to order€3.11
    • Photo: 6003 ZZ6003 ZZTIMKEN17 × 35 × 10available to order€4.32
    • Series illustration (not a photo of this item): 6003 ZZ6003 ZZGMN17 × 35 × 10out of stockon request
    • Series illustration (not a photo of this item): 6003 ZZE6003 ZZENACHI17 × 35 × 10available to orderon request
    02

    Often bought with this

    shaft snap ring Ø17, bore snap ring Ø35, seal 17×35

    6 products
    • Shaft snap ring Ø17CT SEG 17 Z by1000Why it fits: DIN 471 snap ring for a 17 shaft: holds the inner ring on the shaft
      €11.51available to order
    • Shaft snap ring Ø17SEG 17 Z by 1000Why it fits: DIN 471 snap ring for a 17 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø35CT SEG 35 W by 1000Why it fits: DIN 472 snap ring for a 35 bore: holds the outer ring in the housing
      €40.62available to order
    • Bore snap ring Ø35SEG 35 W (100 pcs)Why it fits: DIN 472 snap ring for a 35 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 17×35JULU 017-35-7 TCWhy it fits: Oil seal 17×35: shaft 17 and housing bore 35, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.22600 pcs
    • Seal 17×35JULU 017-35-10 TCWhy it fits: Oil seal 17×35: shaft 17 and housing bore 35, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.24145 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. VBP 2160 (baler) Kuhn same geometry 1 assembly · 4 pcs per machine

      ours: shields on both sides (ZZ); in the machine: seals on both sides (2RS)

      manufacturer’s catalogue: kuhn_vbp-2160

    Number in the manufacturer’s catalogue: by GOST (80103) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 35d 17B 10
    d×D×Bsize 17 × 35 × 10mm
    Cdynamic 6.37kN
    C0static 3.25kN
    mweight 0.038kg

    Deep groove ball bearing 6003-ZZ, design ZZ: metal shields on both sides. Under GOST the same bearing is designated 80103.

    C, C₀, m and limiting speed 28,000 rpm: KG data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80103?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0103 corresponds to the ISO base 6003. Size 17 × 35 × 10 mm, a full equivalent of 6003-ZZ.

    Will 6003 ZZ C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet