+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
KG
6002 ZZ · 15 × 32 × 9

Deep groove ball · 6002 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 6002 ZZ: ⌀15 × ⌀32 × 9 mm6002 ZZZZ
    Fig. 1: 6002 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6002 ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing KG 6002 ZZ

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    7 exact, 43 approximate
    d
    15 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    32 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    9 mm
    Width BRing width. Source: supplier data
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    C
    5.85 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    2.85 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    Limiting speed
    32,000 rpm
    Limiting speedMechanical limit; depends on the seal (SKF 6200: 36,000 open, 17,000 with 2RSH). Source: supplier data
    m
    0.03 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 15 × 32 × 9 from other brands

    51 products
    Series illustration (not a photo of this item): 6002 ZZ
    You are viewingKG 6002 ZZ

    Everything the number specifies matches: series 60, 15 × 32 × 9 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the KG catalogue.

    • Series illustration (not a photo of this item): 6002 ZZ6002 ZZThis bearingKG15 × 32 × 9available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6002 ZZ6002 ZZCT15 × 32 × 983 pcs€0.28
    • Series illustration (not a photo of this item): 6002 ZZ6002 ZZNTE15 × 32 × 966 pcs€0.39
    • Series illustration (not a photo of this item): 6002 ZZ6002 ZZKoyo15 × 32 × 912 pcs€2.49
    • Photo: 6002 ZZ6002 ZZZ&S15 × 32 × 9available to order€0.83
    • Photo: 6002-2Z6002-2ZSKF15 × 32 × 9available to order€2.47
    • Series illustration (not a photo of this item): 6002 ZZE6002 ZZENACHI15 × 32 × 9available to orderon request
    02

    Often bought with this

    shaft snap ring Ø15, bore snap ring Ø32, seal 15×32

    4 products
    • Shaft snap ring Ø15CT SEG 15 Z by 1000Why it fits: DIN 471 snap ring for a 15 shaft: holds the inner ring on the shaft
      €8.92out of stock
    • Bore snap ring Ø32CT SEG 32 W by 1000Why it fits: DIN 472 snap ring for a 32 bore: holds the outer ring in the housing
      €40.80out of stock
    • Seal 15×32JULU 015-32-10 TCWhy it fits: Oil seal 15×32: shaft 15 and housing bore 32, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.21150 pcs
    • Seal 15×32JULU 015-32-7 TCWhy it fits: Oil seal 15×32: shaft 15 and housing bore 32, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.21170 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 32d 15B 9
    d×D×Bsize 15 × 32 × 9mm
    Cdynamic 5.85kN
    C0static 2.85kN
    mweight 0.03kg

    Deep groove ball bearing 6002-ZZ, design ZZ: metal shields on both sides. Under GOST the same bearing is designated 80102.

    C, C₀, m and limiting speed 32,000 rpm: KG data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80102?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0102 corresponds to the ISO base 6002. Size 15 × 32 × 9 mm, a full equivalent of 6002-ZZ.

    Will 6002 ZZ C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet