+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
KG
22315 CW33 · 75 × 160 × 55

Spherical roller · 22315 CW33

radial — highaxial — medium, on both sides
    Drawing of 22315 CW33: ⌀75 × ⌀160 × 55 mm⌀160⌀755522315 CW33
    Fig. 1: 22315 CW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22315 CW33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing KG 22315 CW33

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    3 exact, 25 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    55 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 75 × 160 × 55 from other brands

    29 products
    Series illustration (not a photo of this item): 22315 CW33
    You are viewingKG 22315 CW33

    Everything the number specifies matches: series 223, 75 × 160 × 55 mm, open, no protection, normal clearance, special design. The codes in the number are read against the KG catalogue.

    • Series illustration (not a photo of this item): 22315 CW3322315 CW33This bearingKG75 × 160 × 55available to orderon requestyou are here
    • Series illustration (not a photo of this item): 22315 CW3322315 CW33CT75 × 160 × 55available to orderon request
    • Series illustration (not a photo of this item): 22315 CW3322315 CW33NTE75 × 160 × 55available to orderon request
    02

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus check the version 1 assembly · 1 pcs per machine

      ours has CW33; not decoded: mark “N” in the machine catalogue; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (53615) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Bsize 75 × 160 × 55mm

    Spherical roller bearing 22315. Under GOST the same bearing is designated 53615.

    Frequently asked questions

    What is 53615?

    It is the same bearing under GOST 3189-89: 53615 corresponds to the ISO base 22315. Size 75 × 160 × 55 mm, a full equivalent of 22315.

    Will 22315 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    By make and unit

    this bearing is fitted in machines of these makes

    04

    Reviews

    No reviews yet