+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
KG
22314 MBW33 · 70 × 150 × 51

Spherical roller · 22314 MBW33

radial — highaxial — medium, on both sides
    Drawing of 22314 MBW33: ⌀70 × ⌀150 × 51 mm⌀150⌀705122314 MBW33
    Fig. 1: 22314 MBW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22314 MBW33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing KG 22314 MBW33

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    5 exact, 21 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    150 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    51 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 70 × 150 × 51 from other brands

    28 products
    Series illustration (not a photo of this item): 22314 MBW33
    You are viewingKG 22314 MBW33

    Everything the number specifies matches: series 223, 70 × 150 × 51 mm, open, no protection, normal clearance, special design. The codes in the number are read against the KG catalogue.

    • Series illustration (not a photo of this item): 22314 MBW3322314 MBW33This bearingKG70 × 150 × 51available to orderon requestyou are here
    • Series illustration (not a photo of this item): 22314 MBW3322314 MBW33NTE70 × 150 × 51available to order€47.81
    • Series illustration (not a photo of this item): 22314 MBW3322314 MBW33CT70 × 150 × 51available to orderon request
    • Series illustration (not a photo of this item): 22314MB/W3322314MB/W33DYZV70 × 150 × 51available to orderon request
    • Series illustration (not a photo of this item): 22314 MBW3322314 MBW33FV70 × 150 × 51available to orderon request
    02

    Often bought with this

    shaft snap ring Ø70, bore snap ring Ø150

    2 products
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø150CT SEG 150 W by 100Why it fits: DIN 472 snap ring for a 150 bore: holds the outer ring in the housing
      €86.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 70 × 150 × 51mm

    Spherical roller bearing 22314. Under GOST the same bearing is designated 53614.

    Frequently asked questions

    What is 53614?

    It is the same bearing under GOST 3189-89: 53614 corresponds to the ISO base 22314. Size 70 × 150 × 51 mm, a full equivalent of 22314.

    Will 22314 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet