+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
KG
1218 · 90 × 160 × 30

Self-aligning ball · 1218

radial — mediumaxial — low, on both sides
    Drawing of 1218: ⌀90 × ⌀160 × 30 mm⌀160⌀90301218
    Fig. 1: 1218, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1218

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing KG 1218

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    3 exact, 6 approximate
    d
    90 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    30 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 90 × 160 × 30 from other brands

    9 products
    Series illustration (not a photo of this item): 1218
    You are viewingKG 1218

    Everything the number specifies matches: series 12, 90 × 160 × 30 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the KG catalogue.

    • Series illustration (not a photo of this item): 12181218This bearingKG90 × 160 × 30available to orderon requestyou are here
    • Series illustration (not a photo of this item): 12181218CT90 × 160 × 30100 pcs€12.81
    • Series illustration (not a photo of this item): 12181218SKF90 × 160 × 30available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 90 × 160 × 30mm

    Self-aligning ball bearing 1218. Under GOST the same bearing is designated 1218.

    Frequently asked questions

    What is 1218?

    It is the same bearing under GOST 3189-89: 1218 corresponds to the ISO base 1218. Size 90 × 160 × 30 mm, a full equivalent of 1218.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet