+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
KG
1206 K · 30 × 62 × 16

Self-aligning ball · 1206 K

radial — mediumaxial — low, on both sides
    Drawing of 1206 K: ⌀30 × ⌀62 × 16 mm⌀62⌀30161206 K
    Fig. 1: 1206 K, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1206 K

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing KG 1206 K

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    3 exact, 10 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    16 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 30 × 62 × 16 from other brands

    16 products
    Series illustration (not a photo of this item): 1206 K
    You are viewingKG 1206 K

    Everything the number specifies matches: series 12, 30 × 62 × 16 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the KG catalogue.

    • Series illustration (not a photo of this item): 1206 K1206 KThis bearingKG30 × 62 × 16available to orderon requestyou are here
    • Photo: 1206 K1206 KNEU30 × 62 × 16available to order€3.04
    • Photo: 1206 K1206 KGPZ30 × 62 × 16available to order€4.27
    02

    Often bought with this

    adapter sleeve H206, lock nut M30×1.5, lock washer MB06, bore snap ring Ø62, seal 25×62

    8 products
    • Adapter sleeve H206CT H 206Why it fits: H206 for 1206 K: 1:12 taper, bore 30 for shaft 25 (Koyo, p. 65)
      €1.09384 pcs
    • Adapter sleeve H206H 206Why it fits: H206 for 1206 K: 1:12 taper, bore 30 for shaft 25 (Koyo, p. 65)
      Price to be confirmedavailable to order
    • Lock nut M30×1.5CT KM 06Why it fits: KM06 is the nut for sleeve H206: thread M30×1.5
      €0.64284 pcs
    • Lock nut M30×1.5CT KM 06 leftWhy it fits: KM06 is the nut for sleeve H206: thread M30×1.5
      Price to be confirmed108 pcs
    • Lock washer MB06CT MB 06Why it fits: MB06 locks the KM06 nut (ISO 2982-2)
      €0.13480 pcs
    • Lock washer MB06FAG MB 6Why it fits: MB06 locks the KM06 nut (ISO 2982-2)
      Price to be confirmedavailable to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    • Seal 25×62JULU 025-62-10 TCWhy it fits: Oil seal 25×62: sleeve shaft 25, housing bore for the bearing 62; SN/SNL housings have their own seals, so check against the housing
      €0.39890 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 30 × 62 × 16mm

    Self-aligning ball bearing 1206 K. Under GOST the same bearing is designated 111206.

    Frequently asked questions

    What is 111206?

    It is the same bearing under GOST 3189-89: 111206 corresponds to the ISO base 1206 K. Size 30 × 62 × 16 mm, a full equivalent of 1206 K.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet