+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
KG
1200 · 10 × 30 × 9

Self-aligning ball · 1200

radial — mediumaxial — low, on both sides
    Drawing of 1200: ⌀10 × ⌀30 × 9 mm⌀30⌀1091200
    Fig. 1: 1200, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1200

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing KG 1200

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    2 exact, 0 approximate
    d
    10 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    30 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    9 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 10 × 30 × 9 from other brands

    2 products
    Series illustration (not a photo of this item): 1200
    You are viewingKG 1200

    Everything the number specifies matches: series 12, 10 × 30 × 9 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the KG catalogue.

    • Series illustration (not a photo of this item): 12001200This bearingKG10 × 30 × 9available to orderon requestyou are here
    • Series illustration (not a photo of this item): 12001200CT10 × 30 × 9740 pcs€1
    02

    Often bought with this

    seal 10×30, shaft snap ring Ø10, bore snap ring Ø30

    4 products
    • Seal 10×30JULU 010-30-10 TCWhy it fits: Oil seal 10×30: shaft 10 and housing bore 30, the same as the bearing
      Price to be confirmedavailable to order
    • Seal 10×30JULU 010-30-7 TCWhy it fits: Oil seal 10×30: shaft 10 and housing bore 30, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø10CT SEG 10 Z by1000Why it fits: DIN 471 snap ring for a 10 shaft: holds the inner ring on the shaft
      €6.101 pcs
    • Bore snap ring Ø30CT SEG 30 W by 1000Why it fits: DIN 472 snap ring for a 30 bore: holds the outer ring in the housing
      €29.25available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 10 × 30 × 9mm

    Self-aligning ball bearing 1200. Under GOST the same bearing is designated 1200.

    Frequently asked questions

    What is 1200?

    It is the same bearing under GOST 3189-89: 1200 corresponds to the ISO base 1200. Size 10 × 30 × 9 mm, a full equivalent of 1200.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet