+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €20.57 per piece.
KBS
6219 2RS · 95 × 170 × 32

Deep groove ball · 6219 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6219 2RS: ⌀95 × ⌀170 × 32 mm6219 2RS2RS
    Fig. 1: 6219 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6219 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing KBS 6219 2RS

    €24.89per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    3 exact, 10 approximate
    d
    95 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    170 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    32 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    m
    2.79 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 95 × 170 × 32 from other brands

    13 products
    Photo: 6219 2RS
    You are viewingKBS 6219 2RS
    €24.89baseline for the price comparison

    Everything the number specifies matches: series 62, 95 × 170 × 32 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the KBS catalogue.

    • Photo: 6219 2RS6219 2RSThis bearingKBS95 × 170 × 32available to order€24.89you are here
    • Series illustration (not a photo of this item): 6219 2RSR6219 2RSRFAG95 × 170 × 32available to orderon request
    • Series illustration (not a photo of this item): 6219-2RS16219-2RS1SKF95 × 170 × 32available to orderon request

    Under the price: the difference from the price of this bearing (€24.89).
    02

    Details

    what this bearing is, questions

    About the bearing

    D 170d 95B 32
    d×D×Bsize 95 × 170 × 32mm
    mweight 2.79kg

    Deep groove ball bearing 6219-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180219.

    M: KBS data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180219?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0219 corresponds to the ISO base 6219. Size 95 × 170 × 32 mm, a full equivalent of 6219-2RS.

    Will 6219 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet