+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
ISB
2311 KC3 · 55 × 120 × 43

Self-aligning ball · 2311 KC3

radial — mediumaxial — low, on both sides
    Drawing of 2311 KC3: ⌀55 × ⌀120 × 43 mm⌀120⌀55432311 KC3
    Fig. 1: 2311 KC3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2311 KC3

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing ISB 2311 KC3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 11 approximate
    d
    55 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    120 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    43 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C3
    01

    Equivalents

    the same size 55 × 120 × 43 from other brands

    13 products
    Series illustration (not a photo of this item): 2311 KC3
    You are viewingISB 2311 KC3

    Everything the number specifies matches: series 23, 55 × 120 × 43 mm, open, no protection, K, clearance C3, special design. The codes in the number are read against the ISB catalogue.

    • Series illustration (not a photo of this item): 2311 KC32311 KC3This bearingISB55 × 120 × 43available to orderon requestyou are here
    • Series illustration (not a photo of this item): 2311 K/C32311 K/C3SKF55 × 120 × 43available to orderon request
    02

    Often bought with this

    adapter sleeve H2311, lock nut M55×2, lock washer MB11, bore snap ring Ø120

    7 products
    • Adapter sleeve H2311CT H 2311Why it fits: H2311 for 2311 K: 1:12 taper, bore 55 for shaft 50 (Koyo, p. 65)
      €3.043 pcs
    • Adapter sleeve H2311Z&S H 2311Why it fits: H2311 for 2311 K: 1:12 taper, bore 55 for shaft 50 (Koyo, p. 65)
      €5.12available to order
    • Lock nut M55×2CT KM 11 SILVERWhy it fits: KM11 is the nut for sleeve H2311: thread M55×2
      €1.11786 pcs
    • Lock nut M55×2KM 11Why it fits: KM11 is the nut for sleeve H2311: thread M55×2
      Price to be confirmedavailable to order
    • Lock washer MB11CT MB 11Why it fits: MB11 locks the KM11 nut (ISO 2982-2)
      €0.29950 pcs
    • Lock washer MB11MB 11Why it fits: MB11 locks the KM11 nut (ISO 2982-2)
      Price to be confirmedavailable to order
    • Bore snap ring Ø120CT SEG 120 W by 100Why it fits: DIN 472 snap ring for a 120 bore: holds the outer ring in the housing
      €65.88available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 55 × 120 × 43mm

    Self-aligning ball bearing 2311 K C3.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet