+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
IBB
SS 6812 2RS · 60 × 78 × 10

Deep groove ball · SS 6812 2RS

radial — mediumaxial — low, on both sides
    Drawing of SS 6812 2RS: ⌀60 × ⌀78 × 10 mmSS 6812 2RS2RS
    Fig. 1: SS 6812 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of SS 6812 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing IBB SS 6812 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 6 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    78 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    10 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 60 × 78 × 10 from other brands

    10 products
    Drawing: SS 6812 2RS
    You are viewingIBB SS 6812 2RS

    Everything the number specifies matches: series 68, 60 × 78 × 10 mm, contact seals on both sides, normal clearance, stainless steel. The codes in the number are read against the IBB catalogue.

    • Drawing: SS 6812 2RSSS 6812 2RSThis bearingIBB60 × 78 × 10available to orderon requestyou are here
    • Drawing: SS 6812 2RSSS 6812 2RSNEUTRAL60 × 78 × 10available to orderon request
    02

    Often bought with this

    shaft snap ring Ø60, bore snap ring Ø78

    2 products
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    • Bore snap ring Ø78CT SEG 78 W by 100Why it fits: DIN 472 snap ring for a 78 bore: holds the outer ring in the housing
      €21.429 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 78d 60B 10
    d×D×Bsize 60 × 78 × 10mm

    Deep groove ball bearing 6812-2RS SS, design 2RS: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet