+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
IBB
SS 2204 2RS TN · 20 × 47 × 18

Self-aligning ball · SS 2204 2RS TN

radial — mediumaxial — low, on both sides
    Drawing of SS 2204 2RS TN: ⌀20 × ⌀47 × 18 mm⌀47⌀2018SS 2204 2RS TN2RS
    Fig. 1: SS 2204 2RS TN, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of SS 2204 2RS TN

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing IBB SS 2204 2RS TN

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 11 approximate
    d
    20 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    47 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    18 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 20 × 47 × 18 from other brands

    15 products
    Cross-section drawing to size: Self-aligning ball, 20 × 47 × 18 mm
    You are viewingIBB SS 2204 2RS TN

    Everything the number specifies matches: series 22, 20 × 47 × 18 mm, contact seals on both sides, normal clearance, special design. The codes in the number are read against the IBB catalogue.

    • Cross-section drawing to size: Self-aligning ball, 20 × 47 × 18 mmSS 2204 2RS TNThis bearingIBB20 × 47 × 18available to orderon requestyou are here
    • Cross-section drawing to size: Self-aligning ball, 20 × 47 × 18 mmSS 2204 2RSCT20 × 47 × 1811 pcs€6.57
    • Cross-section drawing to size: Self-aligning ball, 20 × 47 × 18 mmSS 2204 2RSno brand20 × 47 × 18available to orderon request
    02

    Often bought with this

    shaft snap ring Ø20, bore snap ring Ø47, seal 20×47

    5 products
    • Shaft snap ring Ø20CT SEG 20 Z by 1000Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      €22.57available to order
    • Shaft snap ring Ø20SEG 20 Z (100 pcs)Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø47CT SEG 47 W by 1000Why it fits: DIN 472 snap ring for a 47 bore: holds the outer ring in the housing
      €90.2811 pcs
    • Seal 20×47JULU 020-47-10 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.29700 pcs
    • Seal 20×47JULU 020-47-7 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.293,920 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 20 × 47 × 18mm

    Self-aligning ball bearing 2204-2RS SS, design 2RS: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet