+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
GPZ
NU 207 · 35 × 72 × 17

Cylindrical roller · NU 207

radial — high
    Drawing of NU 207: ⌀35 × ⌀72 × 17 mm⌀72⌀3517NU 207
    Fig. 1: NU 207, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NU 207

    Load: radial high; no axial loadCylindrical roller NU

    Bearing GPZ NU 207

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    8 exact, 26 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    17 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.303 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 35 × 72 × 17 from other brands

    37 products
    Series illustration (not a photo of this item): NU 207
    You are viewingGPZ NU 207

    Size and design match across the brand catalogues. The codes in the number are read against the GPZ catalogue.

    • Series illustration (not a photo of this item): NU 207NU 207This bearingGPZ35 × 72 × 17out of stockon requestyou are here
    • Series illustration (not a photo of this item): NU 207NU 207CT35 × 72 × 17297 pcs€2.80
    • Photo: NU 207 ECPNU 207 ECPSKF35 × 72 × 175 pcs€31.69
    • Series illustration (not a photo of this item): NU 207-E-XL-M1NU 207-E-XL-M1FAG35 × 72 × 17available to orderon request
    • Series illustration (not a photo of this item): NU 207 EWNU 207 EWNSK35 × 72 × 17available to orderon request
    • Series illustration (not a photo of this item): NU207ET *5NU207ET *5NSK35 × 72 × 17available to orderon request
    • Series illustration (not a photo of this item): NU207ENU207ENTE35 × 72 × 17available to orderon request
    • Series illustration (not a photo of this item): NU 207 ENU 207 EURB35 × 72 × 17out of stockon request
    02

    Often bought with this

    seal 35×72, shaft snap ring Ø35, bore snap ring Ø72

    6 products
    • Seal 35×72JULU 035-72-12 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing
      €0.4650 pcs
    • Seal 35×72JULU 035-72-10 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing
      €0.502,454 pcs
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Bore snap ring Ø72SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 35 × 72 × 17mm
    mweight 0.303kg

    Cylindrical roller NU bearing NU 207.

    M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 207 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet