+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
GPZ
NJ 314 · 70 × 150 × 35

Cylindrical roller · NJ 314

radial — highaxial — low, on one side
    Drawing of NJ 314: ⌀70 × ⌀150 × 35 mm⌀150⌀7035NJ 314
    Fig. 1: NJ 314, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ 314

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing GPZ NJ 314

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    6 exact, 38 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    150 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    35 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    2.84 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 70 × 150 × 35 from other brands

    46 products
    Series illustration (not a photo of this item): NJ 314
    You are viewingGPZ NJ 314

    Size and design match across the brand catalogues. The codes in the number are read against the GPZ catalogue.

    • Series illustration (not a photo of this item): NJ 314NJ 314This bearingGPZ70 × 150 × 35out of stockon requestyou are here
    • Series illustration (not a photo of this item): NJ 314NJ 314CT70 × 150 × 3526 pcs€16.70
    • Photo: NJ 314NJ 314UTL70 × 150 × 35available to order€74.66
    • Series illustration (not a photo of this item): NJ 314 ENJ 314 EKG70 × 150 × 35available to orderon request
    • Series illustration (not a photo of this item): NJ 314 ENJ 314 ENTE70 × 150 × 35available to orderon request
    • Series illustration (not a photo of this item): NJ 314 ECPNJ 314 ECPSKF70 × 150 × 35available to orderon request
    02

    Often bought with this

    shaft snap ring Ø70, bore snap ring Ø150

    2 products
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø150CT SEG 150 W by 100Why it fits: DIN 472 snap ring for a 150 bore: holds the outer ring in the housing
      €86.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 70 × 150 × 35mm
    mweight 2.84kg

    Cylindrical roller NJ bearing NJ 314.

    M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 314 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet