+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €28.50 per piece.
GPZ
6413 · 65 × 160 × 37

Deep groove ball · 6413

radial — mediumaxial — low, on both sides
    Drawing of 6413: ⌀65 × ⌀160 × 37 mm6413
    Fig. 1: 6413, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6413

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing GPZ 6413

    €34.49per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    5 exact, 4 approximate
    d
    65 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    37 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    3.49 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 65 × 160 × 37 from other brands

    9 products
    Photo: 6413
    You are viewingGPZ 6413
    €34.49baseline for the price comparison

    Everything the number specifies matches: series 64, 65 × 160 × 37 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the GPZ catalogue.

    • Photo: 64136413This bearingGPZ65 × 160 × 37available to order€34.49you are here
    • Series illustration (not a photo of this item): 64136413CT65 × 160 × 37available to order€17.59−€16.90
    • Photo: 64136413FLT65 × 160 × 37available to order€48.19+€13.70
    • Series illustration (not a photo of this item): 64136413FAG65 × 160 × 37available to orderon request
    • Series illustration (not a photo of this item): 64136413KG65 × 160 × 37available to orderon request

    Under the price: the difference from the price of this bearing (€34.49).
    02

    Often bought with this

    shaft snap ring Ø65

    2 products
    • Shaft snap ring Ø65CT SEG 65 Z by1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      €177.91available to order
    • Shaft snap ring Ø65SEG 65 Z by 1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 160d 65B 37
    d×D×Bsize 65 × 160 × 37mm
    mweight 3.49kg

    Deep groove ball bearing 6413. Under GOST the same bearing is designated 413.

    M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 413?

    It is the same bearing under GOST 3189-89: 413 corresponds to the ISO base 6413. Size 65 × 160 × 37 mm, a full equivalent of 6413.

    Will 6413 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet