+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €20.40 per piece.
GPZ
6409 N · 45 × 120 × 29

Deep groove ball · 6409 N

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6409 N: ⌀45 × ⌀120 × 29 mm⌀120⌀45296409 N
    Fig. 1: 6409 N, simplified drawing per ISO 8826-1. Dimensions in mm
    Bearing GPZ 6409 N — photo 1
    Bearing GPZ 6409 N — photo 2
    Bearing GPZ 6409 N — photo 3
    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing GPZ 6409 N

    €24.68per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    2 exact, 9 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    120 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    29 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    1.55 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 45 × 120 × 29 from other brands

    11 products
    Photo: 6409 N
    You are viewingGPZ 6409 N
    €24.68baseline for the price comparison

    Everything the number specifies matches: series 64, 45 × 120 × 29 mm, open, no protection, N, normal clearance, special design. The codes in the number are read against the GPZ catalogue.

    • Photo: 6409 N6409 NThis bearingGPZ45 × 120 × 29available to order€24.68you are here
    • Cross-section drawing to size: Deep groove ball, 45 × 120 × 29 mm6409 NCT45 × 120 × 29available to orderon request

    Under the price: the difference from the price of this bearing (€24.68).
    02

    Often bought with this

    shaft snap ring Ø45, bore snap ring Ø120

    2 products
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø120CT SEG 120 W by 100Why it fits: DIN 472 snap ring for a 120 bore: holds the outer ring in the housing
      €65.88available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines1 makeby parts catalogues

    1. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 1 assembly · 1 pcs per machine

      ours has snap ring groove (N)

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus 1523/​1523V/​1523.3 Belarus same geometry 1 assembly · 1 pcs per machine

      ours has snap ring groove (N)

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (409) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 120d 45B 29
    d×D×Bsize 45 × 120 × 29mm
    mweight 1.55kg

    Deep groove ball bearing 6409. Under GOST the same bearing is designated 409.

    M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 409?

    It is the same bearing under GOST 3189-89: 409 corresponds to the ISO base 6409. Size 45 × 120 × 29 mm, a full equivalent of 6409.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet