+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
GPZ
6317 · 85 × 180 × 41

Deep groove ball · 6317

radial — mediumaxial — low, on both sides
    Drawing of 6317: ⌀85 × ⌀180 × 41 mm6317
    Fig. 1: 6317, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6317

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing GPZ 6317

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    7 exact, 25 approximate
    d
    85 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    180 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    41 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    4.25 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 85 × 180 × 41 from other brands

    32 products
    Series illustration (not a photo of this item): 6317
    You are viewingGPZ 6317

    Everything the number specifies matches: series 63, 85 × 180 × 41 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the GPZ catalogue.

    • Series illustration (not a photo of this item): 63176317This bearingGPZ85 × 180 × 41out of stockon requestyou are here
    • Series illustration (not a photo of this item): 63176317CT85 × 180 × 41138 pcs€18.28
    • Series illustration (not a photo of this item): 63176317NTE85 × 180 × 4150 pcs€24.83
    • Photo: 63176317SKF85 × 180 × 4110 pcs€101.34
    • Series illustration (not a photo of this item): 63176317DYZV85 × 180 × 41available to orderon request
    • Series illustration (not a photo of this item): 63176317FAG85 × 180 × 41available to orderon request
    • Series illustration (not a photo of this item): 63176317KG85 × 180 × 41available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    D 180d 85B 41
    d×D×Bsize 85 × 180 × 41mm
    mweight 4.25kg

    Deep groove ball bearing 6317. Under GOST the same bearing is designated 317.

    M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 317?

    It is the same bearing under GOST 3189-89: 317 corresponds to the ISO base 6317. Size 85 × 180 × 41 mm, a full equivalent of 6317.

    Will 6317 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet