+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €0.48 per piece.
GPZ
607 · 7 × 19 × 6

Deep groove ball · 607

radial — mediumaxial — low, on both sides
    Drawing of 607: ⌀7 × ⌀19 × 6 mm607
    Fig. 1: 607, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 607

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing GPZ 607

    €0.58per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    3 exact, 0 approximate
    d
    7 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    19 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    6 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.008 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 7 × 19 × 6 from other brands

    3 products
    Photo: 607
    You are viewingGPZ 607
    €0.58baseline for the price comparison

    Everything the number specifies matches: ordinary steel, design without special letters. The codes in the number are read against the GPZ catalogue.

    • Photo: 607607This bearingGPZ7 × 19 × 6available to order€0.58you are here
    • Series illustration (not a photo of this item): 607607CT7 × 19 × 6available to orderon request
    • Series illustration (not a photo of this item): 607607SKF7 × 19 × 6available to orderon request

    Under the price: the difference from the price of this bearing (€0.58).
    02

    Often bought with this

    shaft snap ring Ø7, bore snap ring Ø19

    2 products
    • Shaft snap ring Ø7CT SEG 7 Z by1000Why it fits: DIN 471 snap ring for a 7 shaft: holds the inner ring on the shaft
      €5.63out of stock
    • Bore snap ring Ø19CT SEG 19 W by 1000Why it fits: DIN 472 snap ring for a 19 bore: holds the outer ring in the housing
      €10.711 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 19d 7B 6
    d×D×Bsize 7 × 19 × 6mm
    mweight 0.008kg

    Deep groove ball bearing 607. Under GOST the same bearing is designated 17.

    M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 17?

    It is the same bearing under GOST 3189-89: 17 corresponds to the ISO base 607. Size 7 × 19 × 6 mm, a full equivalent of 607.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet