+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
GPZ
6017 · 85 × 130 × 22

Deep groove ball · 6017

radial — mediumaxial — low, on both sides
    Drawing of 6017: ⌀85 × ⌀130 × 22 mm6017
    Fig. 1: 6017, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6017

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing GPZ 6017

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    6 exact, 14 approximate
    d
    85 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    22 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.89 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 85 × 130 × 22 from other brands

    20 products
    Series illustration (not a photo of this item): 6017
    You are viewingGPZ 6017

    Everything the number specifies matches: series 60, 85 × 130 × 22 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the GPZ catalogue.

    • Series illustration (not a photo of this item): 60176017This bearingGPZ85 × 130 × 22out of stockon requestyou are here
    • Series illustration (not a photo of this item): 60176017CT85 × 130 × 2231 pcs€6.99
    • Photo: 60176017FLT85 × 130 × 22available to order€21.56
    • Series illustration (not a photo of this item): 60176017KG85 × 130 × 22available to orderon request
    • Series illustration (not a photo of this item): 60176017SKF85 × 130 × 22available to orderon request
    • Series illustration (not a photo of this item): 60176017URB85 × 130 × 22out of stockon request
    02

    Often bought with this

    seal 85×130

    2 products
    • Seal 85×130JULU 085-130-10 TCWhy it fits: Oil seal 85×130: shaft 85 and housing bore 130, the same as the bearing
      Price to be confirmedavailable to order
    • Seal 85×130JULU 085-130-12 TCWhy it fits: Oil seal 85×130: shaft 85 and housing bore 130, the same as the bearing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines1 makeby parts catalogues

    1. T-150-05-09-25, KhTZ-181 KhTZ check the version 1 assembly · 1 pcs per machine

      not decoded: mark “70-” in the machine catalogue

      manufacturer’s catalogue: Tractors T-150-05-09-25 and KhTZ-181. Operator’s manual

    2. T-156B-09-03 (tractor loader) KhTZ check the version 1 assembly · 1 pcs per machine

      not decoded: mark “70-” in the machine catalogue

      manufacturer’s catalogue: Tractor loader T-156B-09-03. Operator’s manual

    Number in the manufacturer’s catalogue: by GOST (117) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 130d 85B 22
    d×D×Bsize 85 × 130 × 22mm
    mweight 0.89kg

    Deep groove ball bearing 6017. Under GOST the same bearing is designated 117.

    M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 117?

    It is the same bearing under GOST 3189-89: 117 corresponds to the ISO base 6017. Size 85 × 130 × 22 mm, a full equivalent of 6017.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet