+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
GPZ
51110 · 50 × 70 × 14

Thrust ball · 51110

axial — medium, on one side
    Drawing of 51110: ⌀50 × ⌀70 × 14 mm⌀70⌀501451110
    Fig. 1: 51110, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 51110

    Load: no radial load; axial medium, on one sideThrust ball

    Bearing GPZ 51110

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    11 exact, 1 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    70 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    H
    14 mm
    Height HMounting height: the distance between the seating faces of the washers of an assembled thrust bearing (ISO 104). Source: supplier data
    m
    0.16 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 50 × 70 × 14 from other brands

    12 products
    Series illustration (not a photo of this item): 51110
    You are viewingGPZ 51110

    Everything the number specifies matches: series 511, 50 × 70 × 14 mm, ordinary steel, design without special letters. The codes in the number are read against the GPZ catalogue.

    • Series illustration (not a photo of this item): 5111051110This bearingGPZ50 × 70 × 14out of stockon requestyou are here
    • Photo: 5111051110CT50 × 70 × 14653 pcs€1.26
    • Photo: 5111051110WBW50 × 70 × 14available to order€2.13
    • Series illustration (not a photo of this item): 5111051110NTE50 × 70 × 14available to order€2.20
    • Photo: 5111051110FAG50 × 70 × 14available to order€16.59
    • Series illustration (not a photo of this item): 5111051110KG50 × 70 × 14available to orderon request
    • Photo: 5111051110KLT50 × 70 × 14out of stockon request
    • Series illustration (not a photo of this item): 5111051110NACHI50 × 70 × 14available to orderon request
    • Series illustration (not a photo of this item): 5111051110NSK50 × 70 × 14available to orderon request
    • Series illustration (not a photo of this item): 5111051110SKF50 × 70 × 14available to orderon request
    02

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines2 makesby parts catalogues

    1. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus check the version 1 assembly · 2 pcs per machine

      not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. KhTZ-2511, KhTZ-3510 KhTZ check the version 1 assembly · 1 pcs per machine

      not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    Number in the manufacturer’s catalogue: by GOST (8110) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Hsize 50 × 70 × 14mm
    mweight 0.16kg

    Thrust ball bearing 51110. Under GOST the same bearing is designated 8110.

    M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 8110?

    It is the same bearing under GOST 3189-89: 8110 corresponds to the ISO base 51110. Size 50 × 70 × 14 mm, a full equivalent of 51110.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    By make and unit

    this bearing is fitted in machines of these makes

    04

    Reviews

    No reviews yet