+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €43.88 per piece.
GPZ
2313 · 65 × 140 × 48

Self-aligning ball · 2313

radial — mediumaxial — low, on both sides
    Drawing of 2313: ⌀65 × ⌀140 × 48 mm⌀140⌀65482313
    Fig. 1: 2313, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2313

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing GPZ 2313

    €53.09per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    4 exact, 4 approximate
    d
    65 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    48 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    3.25 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 65 × 140 × 48 from other brands

    8 products
    Photo: 2313
    You are viewingGPZ 2313
    €53.09baseline for the price comparison

    Everything the number specifies matches: series 23, 65 × 140 × 48 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the GPZ catalogue.

    • Photo: 23132313This bearingGPZ65 × 140 × 48available to order€53.09you are here
    • Series illustration (not a photo of this item): 23132313NSK65 × 140 × 48available to orderon request
    • Series illustration (not a photo of this item): 23132313SKF65 × 140 × 48available to orderon request
    • Series illustration (not a photo of this item): 23132313ZVL65 × 140 × 48available to orderon request

    Under the price: the difference from the price of this bearing (€53.09).
    02

    Often bought with this

    shaft snap ring Ø65

    2 products
    • Shaft snap ring Ø65CT SEG 65 Z by1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      €177.91available to order
    • Shaft snap ring Ø65SEG 65 Z by 1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines1 makeby parts catalogues

    1. KhTZ-17021, KhTZ-17221 KhTZ check the version 1 assembly · 1 pcs per machine

      the type of our item by number does not match its section: please check; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: Tractors KhTZ-17021 and KhTZ-17221. Operator’s manual 170.00.000 RE

    2. T-150K (KhTZ-150K-09-25) KhTZ check the version 1 assembly · 1 pcs per machine

      the type of our item by number does not match its section: please check; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: Tractor KhTZ-150K-09-25. Operator’s manual 151.00.000-09-25 RE

    Number in the manufacturer’s catalogue: by GOST (1613) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Bsize 65 × 140 × 48mm
    mweight 3.25kg

    Self-aligning ball bearing 2313. Under GOST the same bearing is designated 1613.

    M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 1613?

    It is the same bearing under GOST 3189-89: 1613 corresponds to the ISO base 2313. Size 65 × 140 × 48 mm, a full equivalent of 2313.

    Will 2313 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet