+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €3.63 per piece.
GPZ
16012 · 60 × 95 × 11

Deep groove ball · 16012

radial — mediumaxial — low, on both sides
    Drawing of 16012: ⌀60 × ⌀95 × 11 mm16012
    Fig. 1: 16012, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16012

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing GPZ 16012

    €4.39per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    4 exact, 0 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    95 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    11 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.28 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 60 × 95 × 11 from other brands

    4 products
    Photo: 16012
    You are viewingGPZ 16012
    €4.39baseline for the price comparison

    Everything the number specifies matches: series 160, 60 × 95 × 11 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the GPZ catalogue.

    • Photo: 1601216012This bearingGPZ60 × 95 × 11available to order€4.39you are here
    • Series illustration (not a photo of this item): 1601216012CT60 × 95 × 1183 pcs€3.45−€0.94
    • Series illustration (not a photo of this item): 1601216012NACHI60 × 95 × 11available to orderon request
    • Series illustration (not a photo of this item): 1601216012SKF60 × 95 × 11out of stockon request

    Under the price: the difference from the price of this bearing (€4.39).
    02

    Often bought with this

    seal 60×95, shaft snap ring Ø60, bore snap ring Ø95

    4 products
    • Seal 60×95JULU 060-95-10 TCWhy it fits: Oil seal 60×95: shaft 60 and housing bore 95, the same as the bearing
      €0.71385 pcs
    • Seal 60×95NQK 60x95x10Why it fits: Oil seal 60×95: shaft 60 and housing bore 95, the same as the bearing
      €1.98out of stock
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    • Bore snap ring Ø95CT-RING SEG 95 W by 100Why it fits: DIN 472 snap ring for a 95 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 95d 60B 11
    d×D×Bsize 60 × 95 × 11mm
    mweight 0.28kg

    Deep groove ball bearing 16012. Under GOST the same bearing is designated 7000112.

    M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 7000112?

    It is the same bearing under GOST 3189-89: 7000112 corresponds to the ISO base 16012. Size 60 × 95 × 11 mm, a full equivalent of 16012.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet