+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €6.18 per piece.
GPZ
1306 · 30 × 72 × 19

Self-aligning ball · 1306

radial — mediumaxial — low, on both sides
    Drawing of 1306: ⌀30 × ⌀72 × 19 mm⌀72⌀30191306
    Fig. 1: 1306, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1306

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing GPZ 1306

    €7.48per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    5 exact, 5 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    19 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.39 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 30 × 72 × 19 from other brands

    12 products
    Photo: 1306
    You are viewingGPZ 1306
    €7.48baseline for the price comparison

    Everything the number specifies matches: series 13, 30 × 72 × 19 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the GPZ catalogue.

    • Photo: 13061306This bearingGPZ30 × 72 × 19available to order€7.48you are here
    • Series illustration (not a photo of this item): 13061306CT30 × 72 × 1948 pcs€3.38−€4.10
    • Photo: 13061306Z&S30 × 72 × 19available to order€4.65−€2.83
    • Series illustration (not a photo of this item): 13061306KG30 × 72 × 19available to orderon request
    • Series illustration (not a photo of this item): 13061306NSK30 × 72 × 19available to orderon request

    Under the price: the difference from the price of this bearing (€7.48).
    02

    Often bought with this

    seal 30×72, shaft snap ring Ø30, bore snap ring Ø72

    6 products
    • Seal 30×72JULU 030-72-10 TCWhy it fits: Oil seal 30×72: shaft 30 and housing bore 72, the same as the bearing
      €0.392,205 pcs
    • Seal 30×72SOG 100958N 30x72x10Why it fits: Oil seal 30×72: shaft 30 and housing bore 72, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Bore snap ring Ø72SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 30 × 72 × 19mm
    mweight 0.39kg

    Self-aligning ball bearing 1306. Under GOST the same bearing is designated 1306.

    M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 1306?

    It is the same bearing under GOST 3189-89: 1306 corresponds to the ISO base 1306. Size 30 × 72 × 19 mm, a full equivalent of 1306.

    Will 1306 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet