+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €28.80 per piece.
GPZ
1218 K · 90 × 160 × 30

Self-aligning ball · 1218 K

radial — mediumaxial — low, on both sides
    Drawing of 1218 K: ⌀90 × ⌀160 × 30 mm⌀160⌀90301218 K
    Fig. 1: 1218 K, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1218 K

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing GPZ 1218 K

    €34.85per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    4 exact, 3 approximate
    d
    90 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    30 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    1.1 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 90 × 160 × 30 from other brands

    9 products
    Photo: 1218 K
    You are viewingGPZ 1218 K
    €34.85baseline for the price comparison

    Everything the number specifies matches: series 12, 90 × 160 × 30 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the GPZ catalogue.

    • Photo: 1218 K1218 KThis bearingGPZ90 × 160 × 30available to order€34.85you are here
    • Photo: 1218 K1218 KZKL90 × 160 × 30available to order€59.74+€24.89
    • Series illustration (not a photo of this item): 1218 K1218 Kno brand90 × 160 × 30available to orderon request
    • Series illustration (not a photo of this item): 1218 K1218 KNTE90 × 160 × 30available to orderon request

    Under the price: the difference from the price of this bearing (€34.85).
    02

    Often bought with this

    adapter sleeve H218, lock nut M90×2, lock washer MB18

    6 products
    • Adapter sleeve H218CT H 218Why it fits: H218 for 1218 K: 1:12 taper, bore 90 for shaft 80 (Koyo, p. 65)
      €8.42available to order
    • Adapter sleeve H218H 218Why it fits: H218 for 1218 K: 1:12 taper, bore 90 for shaft 80 (Koyo, p. 65)
      Price to be confirmedavailable to order
    • Lock nut M90×2CT KM 18 blackWhy it fits: KM18 is the nut for sleeve H218: thread M90×2
      €3.80available to order
    • Lock nut M90×2KM 18Why it fits: KM18 is the nut for sleeve H218: thread M90×2
      Price to be confirmedavailable to order
    • Lock washer MB18CT MB 18Why it fits: MB18 locks the KM18 nut (ISO 2982-2)
      €0.58240 pcs
    • Lock washer MB18FAG MB 18Why it fits: MB18 locks the KM18 nut (ISO 2982-2)
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 90 × 160 × 30mm
    mweight 1.1kg

    Self-aligning ball bearing 1218 K. Under GOST the same bearing is designated 111218.

    M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 111218?

    It is the same bearing under GOST 3189-89: 111218 corresponds to the ISO base 1218 K. Size 90 × 160 × 30 mm, a full equivalent of 1218 K.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet