+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
GPZ

There are no dimensions in the data, so no drawing is built.

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing GPZ 1201

Price on request
Available to order
Request a quoteIn the cart: send the request

Specifications

Manufacturer number
Equivalents
4 exact, 1 approximate
d
12 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
32 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
12 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.04 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 12 × 32 × 12 from other brands

5 products
Series illustration (not a photo of this item): 1201
You are viewingGPZ 1201

Everything the number specifies matches: series 12, 12 × 32 × 12 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the GPZ catalogue.

  • Series illustration (not a photo of this item): 12011201This bearingGPZ12 × 32 × 12out of stockon requestyou are here
  • Series illustration (not a photo of this item): 12011201CT12 × 32 × 1067 pcs€0.91
  • Series illustration (not a photo of this item): 12011201KG12 × 32 × 10available to orderon request
  • Series illustration (not a photo of this item): 12011201NTE12 × 32 × 10available to orderon request
02

Often bought with this

seal 12×32, shaft snap ring Ø12, bore snap ring Ø32

4 products
  • Seal 12×32JULU 012-32-7 TCWhy it fits: Oil seal 12×32: shaft 12 and housing bore 32, the same as the bearing
    €0.211,410 pcs
  • Shaft snap ring Ø12CT SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
    €0.61available to order
  • Shaft snap ring Ø12SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
    Price to be confirmedavailable to order
  • Bore snap ring Ø32CT SEG 32 W by 1000Why it fits: DIN 472 snap ring for a 32 bore: holds the outer ring in the housing
    €40.80out of stock
03

Details

what this bearing is, questions

About the bearing

d×D×Bsize 12 × 32 × 12mm
mweight 0.04kg

Self-aligning ball bearing 1201.

M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

04

Reviews

No reviews yet