+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
FV
30307 A · 35 × 80 × 22.75

Tapered roller · 30307 A

at an angle — high, on one side
    Drawing of 30307 A: ⌀35 × ⌀80 × 22.75 mm⌀80⌀35B 21T 22.75C 18α30307 A
    Fig. 1: 30307 A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 30307 A

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing FV 30307 A

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    3 exact, 12 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    21 mm
    Width BRing width. Source: supplier data
    T
    22.75 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
    Cup width C
    18 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    01

    Equivalents

    the same size 35 × 80 × 22.75 from other brands

    18 products
    Series illustration (not a photo of this item): 30307 A
    You are viewingFV 30307 A

    Everything the number specifies matches: series 303, 35 × 80 × 21 mm, special design. The codes in the number are read against the FV catalogue.

    • Series illustration (not a photo of this item): 30307 A30307 AThis bearingFV35 × 80 × 21available to orderon requestyou are here
    • Photo: 30307 A30307 AZ&S35 × 80 × 21available to order€6.39
    • Series illustration (not a photo of this item): 30307A30307AFAG35 × 80 × 21available to orderon request
    02

    Often bought with this

    seal 35×80, shaft snap ring Ø35, bore snap ring Ø80

    6 products
    • Seal 35×80JULU 035-80-10 TCWhy it fits: Oil seal 35×80: shaft 35 and housing bore 80, the same as the bearing
      €0.53250 pcs
    • Seal 35×80035-80-10Why it fits: Oil seal 35×80: shaft 35 and housing bore 80, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines1 makeby parts catalogues

    1. Maschio Bisonte (compactor) Maschio Gaspardo same geometry 2 assemblies

      ours has A

      manufacturer’s catalogue: maschio_bisonte-2016

    2. Maschio Tigre (disc harrow) Maschio Gaspardo same geometry 2 assemblies

      ours has A

      manufacturer’s catalogue: maschio_tigre-2016

    Number in the manufacturer’s catalogue: by GOST (7307) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Tsize 35 × 80 × 22.75mm

    Tapered roller bearing 30307. Under GOST the same bearing is designated 7307.

    Frequently asked questions

    What is 7307?

    It is the same bearing under GOST 3189-89: 7307 corresponds to the ISO base 30307. Size 35 × 80 × 22.75 mm, a full equivalent of 30307.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet