+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
FŁT
6208 2RS · 40 × 80 × 18

Deep groove ball · 6208 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6208 2RS: ⌀40 × ⌀80 × 18 mm6208 2RS2RS
    Fig. 1: 6208 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6208 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FŁT 6208 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    16 exact, 67 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    18 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 40 × 80 × 18 from other brands

    88 products
    Series illustration (not a photo of this item): 6208 2RS
    You are viewingFŁT 6208 2RS

    Everything the number specifies matches: series 62, 40 × 80 × 18 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the FŁT catalogue.

    • Series illustration (not a photo of this item): 6208 2RS6208 2RSThis bearingFŁT40 × 80 × 18available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6208 2RS6208 2RSCT40 × 80 × 18176 pcs€1.67
    • Series illustration (not a photo of this item): 6208 2RS6208 2RSNTE40 × 80 × 181,692 pcs€2.80
    • Series illustration (not a photo of this item): 6208 2NSE6208 2NSENACHI40 × 80 × 1835 pcs€8.19
    • Series illustration (not a photo of this item): 6208 2HRS6208 2HRSFAG40 × 80 × 1898 pcs€8.60
    • Photo: 6208 2RS6208 2RSKLT40 × 80 × 18available to order€1.59
    • Photo: 6208 2RS6208 2RSZ&S40 × 80 × 18available to order€3.80
    • Photo: 6208 2RS6208 2RSZVL40 × 80 × 18available to order€6.57
    • Photo: 6208-2RS16208-2RS1SKF40 × 80 × 18available to order€11.35
    • Series illustration (not a photo of this item): 6208 2RS6208 2RSno brand40 × 80 × 18available to orderon request
    02

    Often bought with this

    shaft snap ring Ø40, bore snap ring Ø80, seal 40×80

    6 products
    • Shaft snap ring Ø40CT SEG 40 Z by 1000Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      €54.16available to order
    • Shaft snap ring Ø40SEG 40 Z (100 pcs)Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 40×80JULU 040-80-7 TCWhy it fits: Oil seal 40×80: shaft 40 and housing bore 80, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.53770 pcs
    • Seal 40×80JULU 040-80-10 TCWhy it fits: Oil seal 40×80: shaft 40 and housing bore 80, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.54463 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    24 machines4 makesby parts catalogues

    1. VBP 2160 (baler) Kuhn exactly this number 2 assemblies · 2 pcs per machine

      manufacturer’s catalogue: kuhn_vbp-2160

    2. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 6 assemblies · 7 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    3. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus same geometry 4 assemblies · 5 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    4. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 3 assemblies · 4 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    5. Belarus 821/​921 (821.2/​821.3/​921.2/​921.3) Belarus same geometry 3 assemblies · 4 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS 821/​921. 921-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (180208) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 80d 40B 18
    d×D×Bsize 40 × 80 × 18mm

    Deep groove ball bearing 6208-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180208.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180208?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0208 corresponds to the ISO base 6208. Size 40 × 80 × 18 mm, a full equivalent of 6208-2RS.

    Will 6208 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet