+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €22.91 per piece.
Bearing assembly part FKL N 210 — photo 1
Load: radial high; no axial loadCylindrical roller N

Bearing assembly part FKL N 210

€27.72per piece incl. VAT
Available to orderThe manager confirms the lead time
In the cart

Specifications

Manufacturer number
Equivalents
3 exact, 36 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
90 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
20 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
1.3 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 50 × 90 × 20 from other brands

42 products
Photo: N 210
You are viewingFKL N 210
€27.72baseline for the price comparison

Size and design match across the brand catalogues. The codes in the number are read against the FKL catalogue.

  • Series illustration (not a photo of this item): N 210N 210CT50 × 90 × 20available to orderon request
  • Series illustration (not a photo of this item): N 210 E-XL-TVP2N 210 E-XL-TVP2FAG50 × 90 × 20available to orderon request
  • Series illustration (not a photo of this item): N 210N 210KG50 × 90 × 20available to orderon request

Under the price: the difference from the price of this bearing (€27.72).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 50 × 90 × 20mm
mweight 1.3kg

Cylindrical roller N bearing N 210.

M: FKL data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 210 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet