+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6306 Z · 30 × 72 × 19

Deep groove ball · 6306 Z

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6306 Z: ⌀30 × ⌀72 × 19 mm⌀72⌀30196306 ZZ
    Fig. 1: 6306 Z, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6306 Z

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FKL 6306 Z

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    3 exact, 78 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    19 mm
    Width BRing width. Source: two supplier sources
    Seal
    Zshield, one side
    Clearance
    normal clearance
    m
    0.35 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 30 × 72 × 19 from other brands

    82 products
    Series illustration (not a photo of this item): 6306 Z
    You are viewingFKL 6306 Z

    Everything the number specifies matches: series 63, 30 × 72 × 19 mm, shield on one side, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the FKL catalogue.

    • Series illustration (not a photo of this item): 6306 Z6306 ZThis bearingFKL30 × 72 × 19out of stockon requestyou are here
    • Series illustration (not a photo of this item): 6306 Z6306 ZCT30 × 72 × 19available to orderon request
    • Series illustration (not a photo of this item): 6306 ZR6306 ZRNTE30 × 72 × 19available to orderon request
    02

    Often bought with this

    shaft snap ring Ø30, bore snap ring Ø72, seal 30×72

    6 products
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Bore snap ring Ø72SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 30×72JULU 030-72-10 TCWhy it fits: Oil seal 30×72: shaft 30 and housing bore 72, the same as the bearing; the bearing has its own seals (Z), and the oil seal closes the unit from outside
      €0.392,205 pcs
    • Seal 30×72SOG 100958N 30x72x10Why it fits: Oil seal 30×72: shaft 30 and housing bore 72, the same as the bearing; the bearing has its own seals (Z), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    16 machines2 makesby parts catalogues

    1. T-156B-09-03 (tractor loader) KhTZ same geometry 3 assemblies · 4 pcs per machine

      the machine has A; ours does not; ours: shield on one side; in the machine: open

      manufacturer’s catalogue: Tractor loader T-156B-09-03. Operator’s manual

    2. KhTZ-16131, KhTZ-16331 KhTZ same geometry 2 assemblies · 3 pcs per machine

      ours: shield on one side; in the machine: open

      manufacturer’s catalogue: Tractors KhTZ-16131, KhTZ-16331. Operator’s manual 161.00.000 RE

    3. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus same geometry 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours: shield on one side; in the machine: open

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    4. Belarus 922.3/​922.4 Belarus same geometry 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours: shield on one side; in the machine: open

      manufacturer’s catalogue: BELARUS 922.3/​922.4. 922-0000010 KDS. Catalogue of parts and assembly units, 2013 (RUE MTZ)

    5. KhTZ-17021, KhTZ-17221 KhTZ same geometry 2 assemblies · 2 pcs per machine

      ours: shield on one side; in the machine: open

      manufacturer’s catalogue: Tractors KhTZ-17021 and KhTZ-17221. Operator’s manual 170.00.000 RE

    Number in the manufacturer’s catalogue: by GOST (60306) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 72d 30B 19
    d×D×Bsize 30 × 72 × 19mm
    mweight 0.35kg

    Deep groove ball bearing 6306-Z, design Z: shield on one side. Under GOST the same bearing is designated 60306.

    M: FKL data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 60306?

    It is the same bearing under GOST 3189-89: 6 — shield on one side, 0306 corresponds to the ISO base 6306. Size 30 × 72 × 19 mm, a full equivalent of 6306-Z.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet