+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6208 2RS K · 40 × 80 × 18

Deep groove ball · 6208 2RS K

radial — mediumaxial — low, on both sides
    Drawing of 6208 2RS K: ⌀40 × ⌀80 × 18 mm6208 2RS K2RS
    Fig. 1: 6208 2RS K, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6208 2RS K

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FKL 6208 2RS K

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    7 exact, 80 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    18 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    m
    0.37 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 40 × 80 × 18 from other brands

    87 products
    Series illustration (not a photo of this item): 6208 2RS K
    You are viewingFKL 6208 2RS K

    Everything the number specifies matches: series 62, 40 × 80 × 18 mm, contact seals on both sides, K, normal clearance, special design. The codes in the number are read against the FKL catalogue.

    • Series illustration (not a photo of this item): 6208 2RS K6208 2RS KThis bearingFKL40 × 80 × 18out of stockon requestyou are here
    • Photo: 6208 2RS K6208 2RS KZ&S40 × 80 × 18available to order€8.71
    • Photo: 6208 2RS K6208 2RS KKBS40 × 80 × 18available to order€13.07
    • Series illustration (not a photo of this item): 6208 K 2RS6208 K 2RSFersa40 × 80 × 18available to orderon request
    • Series illustration (not a photo of this item): 6208-2RS1K6208-2RS1KSKF40 × 80 × 18available to orderon request
    • Series illustration (not a photo of this item): 6208K.2RSR6208K.2RSRSLF40 × 80 × 18available to orderon request
    • Series illustration (not a photo of this item): 6208 2RS K6208 2RS KZVL40 × 80 × 18out of stockon request
    02

    Details

    what this bearing is, questions

    Where this bearing is fitted

    24 machines4 makesby parts catalogues

    1. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 6 assemblies · 7 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has K

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    2. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus same geometry 4 assemblies · 5 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has K

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    3. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 3 assemblies · 4 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has K

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    4. Belarus 821/​921 (821.2/​821.3/​921.2/​921.3) Belarus same geometry 3 assemblies · 4 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has K

      manufacturer’s catalogue: BELARUS 821/​921. 921-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    5. Belarus-80Kh/​80Kh.1/​100Kh Belarus same geometry 3 assemblies · 3 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has K

      manufacturer’s catalogue: BELARUS-80Kh/​80Kh.1/​100Kh. 80Kh-0000010 KDS. Catalogue of assembly units and parts (RUE MTZ, 2012)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 80d 40B 18
    d×D×Bsize 40 × 80 × 18mm
    mweight 0.37kg

    Deep groove ball bearing 6208 K-2RS, design 2RS: contact seals on both sides.

    M: FKL data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Will 6208 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    By make and unit

    this bearing is fitted in machines of these makes

    04

    Reviews

    No reviews yet