+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NJ 326-E-M1 · 130 × 280 × 58

Cylindrical roller · NJ 326-E-M1

radial — highaxial — low, on one side
    Drawing of NJ 326-E-M1: ⌀130 × ⌀280 × 58 mm⌀280⌀13058NJ 326-E-M1
    Fig. 1: NJ 326-E-M1, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ 326-E-M1

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing FAG NJ 326-E-M1

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 17 approximate
    d
    130 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    280 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    58 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 130 × 280 × 58 from other brands

    18 products
    Series illustration (not a photo of this item): NJ 326-E-M1
    You are viewingFAG NJ 326-E-M1

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): N326 MN326 MMCT130 × 280 × 58available to orderon request
    • Series illustration (not a photo of this item): NJ326EMNJ326EME, MCT130 × 280 × 58available to orderon request
    • Series illustration (not a photo of this item): NU326 MNU326 MMCT130 × 280 × 58available to orderon request
    • Series illustration (not a photo of this item): N326EMN326EME, MDYZV130 × 280 × 58available to orderon request
    • Series illustration (not a photo of this item): N326 -E-M1N326 -E-M1different designFAG130 × 280 × 58available to orderon request
    • Series illustration (not a photo of this item): N 326 E-XL-M1-C3N 326 E-XL-M1-C3clearance C3, E, M1, XLFAG130 × 280 × 58available to orderon request
    • Series illustration (not a photo of this item): NJ 326-E-XL-M1-C3NJ 326-E-XL-M1-C3clearance C3, E, M1, XLFAG130 × 280 × 58available to orderon request
    • Series illustration (not a photo of this item): NU 326 E-XL-TVP2NU 326 E-XL-TVP2E, TVP2, XLFAG130 × 280 × 58available to orderon request
    • Series illustration (not a photo of this item): NU 326 EM1NU 326 EM1different designFAG130 × 280 × 58available to orderon request
    • Series illustration (not a photo of this item): N 326 MN 326 MMNTE130 × 280 × 58available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 130 × 280 × 58mm

    Cylindrical roller NJ bearing NJ 326-E-M1.

    Frequently asked questions

    Will 326 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet