+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NJ 2217-E-XL-M1 · 85 × 150 × 36

Cylindrical roller · NJ 2217 E-XL-M1

radial — highaxial — low, on one side
    Drawing of NJ 2217 E-XL-M1: ⌀85 × ⌀150 × 36 mm⌀150⌀8536NJ 2217 E-XL-M1
    Fig. 1: NJ 2217 E-XL-M1, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ 2217-E-XL-M1

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing FAG NJ 2217-E-XL-M1

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 4 approximate
    d
    85 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    150 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    36 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 85 × 150 × 36 from other brands

    5 products
    Series illustration (not a photo of this item): NJ 2217 E-XL-M1
    You are viewingFAG NJ 2217-E-XL-M1

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NU 2217 ECJNU 2217 ECJreinforced design EC, pressed steel cageSKF85 × 150 × 36available to orderon request
    • Series illustration (not a photo of this item): NU 2217 ECP/C3NU 2217 ECP/C3clearance C3, reinforced design EC, PSKF85 × 150 × 36available to orderon request
    • Series illustration (not a photo of this item): NU2217 EMNU2217 EME, MURB85 × 150 × 36available to orderon request
    • Series illustration (not a photo of this item): NJ2217-E-XL-M1-C3NJ2217-E-XL-M1-C3clearance C3FAG85 × 150 × 36available to orderon request
    02

    Often bought with this

    bore snap ring Ø150

    1 product
    • Bore snap ring Ø150CT SEG 150 W by 100Why it fits: DIN 472 snap ring for a 150 bore: holds the outer ring in the housing
      €86.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 85 × 150 × 36mm

    Cylindrical roller NJ bearing NJ 2217 E-XL-M1.

    Frequently asked questions

    Will 2217 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet