+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6316-2RSR · 80 × 170 × 39

Deep groove ball · 6316 2RSR

radial — mediumaxial — low, on both sides
    Drawing of 6316 2RSR: ⌀80 × ⌀170 × 39 mm6316 2RSR2RSR
    Fig. 1: 6316 2RSR, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6316-2RSR

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 6316-2RSR

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    5 exact, 26 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    170 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    39 mm
    Width BRing width. Source: supplier data
    Seal
    2RSRcontact seals on both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 80 × 170 × 39 from other brands

    32 products
    Series illustration (not a photo of this item): 6316 2RSR
    You are viewingFAG 6316-2RSR

    Everything the number specifies matches: series 63, 80 × 170 × 39 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the FAG catalogue.

    • Series illustration (not a photo of this item): 6316 2RSR6316 2RSRThis bearingFAG80 × 170 × 39available to orderon requestyou are here
    • Photo: 6316 -2RS16316 -2RS1SKF80 × 170 × 394 pcs€166.73
    • Series illustration (not a photo of this item): 6316 2RS6316 2RSCT80 × 170 × 39available to order€16.54
    • Photo: 6316 2RS6316 2RSZ&S80 × 170 × 39available to order€34.45
    • Series illustration (not a photo of this item): 6316 2RS6316 2RSKG80 × 170 × 39available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    D 170d 80B 39
    d×D×Bsize 80 × 170 × 39mm

    Deep groove ball bearing 6316-2RS, design 2RSR: contact seals on both sides. Under GOST the same bearing is designated 180316.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180316?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0316 corresponds to the ISO base 6316. Size 80 × 170 × 39 mm, a full equivalent of 6316-2RS.

    Will 6316 2RSR C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet