+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6313-2RS-C3 · 65 × 140 × 33

Deep groove ball · 6313 2RS C3

radial — mediumaxial — low, on both sides
    Drawing of 6313 2RS C3: ⌀65 × ⌀140 × 33 mm6313 2RS C32RS
    Fig. 1: 6313 2RS C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6313-2RS-C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 6313-2RS-C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    4 exact, 29 approximate
    d
    65 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    33 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    C3
    m
    2.1 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 65 × 140 × 33 from other brands

    34 products
    Series illustration (not a photo of this item): 6313 2RS C3
    You are viewingFAG 6313-2RS-C3

    Everything the number specifies matches: series 63, 65 × 140 × 33 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the FAG catalogue.

    • Series illustration (not a photo of this item): 6313 2RS C36313 2RS C3This bearingFAG65 × 140 × 33out of stockon requestyou are here
    • Series illustration (not a photo of this item): 6313-2RS1/C36313-2RS1/C3SKF65 × 140 × 33available to order€62.22
    • Series illustration (not a photo of this item): 6313 2RSC36313 2RSC3KG65 × 140 × 33available to orderon request
    • Series illustration (not a photo of this item): 6313 2RS C36313 2RS C3NTE65 × 140 × 33available to orderon request
    02

    Often bought with this

    shaft snap ring Ø65

    2 products
    • Shaft snap ring Ø65CT SEG 65 Z by1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      €177.91available to order
    • Shaft snap ring Ø65SEG 65 Z by 1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    7 machines1 makeby parts catalogues

    1. KhTZ-16131, KhTZ-16331 KhTZ same geometry 4 assemblies · 4 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors KhTZ-16131, KhTZ-16331. Operator’s manual 161.00.000 RE

    2. T-156B-09-03 (tractor loader) KhTZ same geometry 4 assemblies · 4 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractor loader T-156B-09-03. Operator’s manual

    3. KhTZ-17021, KhTZ-17221 KhTZ same geometry 2 assemblies · 2 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors KhTZ-17021 and KhTZ-17221. Operator’s manual 170.00.000 RE

    4. T-150-05-09-25, KhTZ-181 KhTZ same geometry 2 assemblies · 2 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors T-150-05-09-25 and KhTZ-181. Operator’s manual

    5. T-150K (KhTZ-150K-09-25) KhTZ same geometry 1 assembly · 2 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractor KhTZ-150K-09-25. Operator’s manual 151.00.000-09-25 RE

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 140d 65B 33
    d×D×Bsize 65 × 140 × 33mm
    mweight 2.1kg

    Deep groove ball bearing 6313-2RS C3, design 2RS: contact seals on both sides.

    M: FAG data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet