+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6310-C-M-C3 · 50 × 110 × 27

Deep groove ball · 6310 C-M-C3

radial — mediumaxial — low, on both sides
    Drawing of 6310 C-M-C3: ⌀50 × ⌀110 × 27 mm6310 C-M-C3
    Fig. 1: 6310 C-M-C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6310-C-M-C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 6310-C-M-C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 61 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    27 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C3
    01

    Equivalents

    the same size 50 × 110 × 27 from other brands

    63 products
    Drawing: 6310 C-M-C3
    You are viewingFAG 6310-C-M-C3

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6310 2RS C36310 2RS C3contact seals on both sides, standard designCT50 × 110 × 2716 pcs€3.96
    • Series illustration (not a photo of this item): 6310 2RS6310 2RScontact seals on both sides, normal clearance, standard designCT50 × 110 × 27124 pcs€4.49
    • Series illustration (not a photo of this item): 6310 2RS6310 2RScontact seals on both sides, normal clearance, standard designNTE50 × 110 × 27381 pcs€7.77
    • Photo: 6310 2RSR C36310 2RSR C3contact seals on both sides, standard designFAG50 × 110 × 27179 pcs€24.85
    • Series illustration (not a photo of this item): 6310 2RS C36310 2RS C3contact seals on both sides, standard designKoyo50 × 110 × 2711 pcs€28.02
    • Photo: 6310-2RS16310-2RS1contact seals on both sides, normal clearance, standard designSKF50 × 110 × 2777 pcs€29.11
    • Photo: 6310 2RS6310 2RScontact seals on both sides, normal clearance, standard designKLT50 × 110 × 27available to order€4.57
    • Series illustration (not a photo of this item): 6310 2RS C36310 2RS C3contact seals on both sides, standard designNTE50 × 110 × 27available to order€7.26
    • Photo: 6310 2RS6310 2RScontact seals on both sides, normal clearance, standard designFJK50 × 110 × 27available to order€9.79
    • Photo: 6310 2RS6310 2RScontact seals on both sides, normal clearance, standard designZ&S50 × 110 × 27available to order€11.39
    02

    Often bought with this

    seal 50×110, shaft snap ring Ø50, bore snap ring Ø110

    4 products
    • Seal 50×110JULU 050-110-10 TCWhy it fits: Oil seal 50×110: shaft 50 and housing bore 110, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    11 machines2 makesby parts catalogues

    1. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours: open; in the machine: shield on one side; ours has clearance C3; the machine takes normal (CN); ours has C, M

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus same geometry 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours: open; in the machine: shield on one side; ours has clearance C3; the machine takes normal (CN); ours has C, M

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    3. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus same geometry 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours: open; in the machine: shield on one side; ours has clearance C3; the machine takes normal (CN); ours has C, M

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    4. Belarus 1523/​1523V/​1523.3 Belarus same geometry 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours: open; in the machine: shield on one side; ours has clearance C3; the machine takes normal (CN); ours has C, M

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    5. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours: open; in the machine: shield on one side; ours has clearance C3; the machine takes normal (CN); ours has C, M

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 110d 50B 27
    d×D×Bsize 50 × 110 × 27mm

    Deep groove ball bearing 6310 C3.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet