+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6309-2Z · 45 × 100 × 25

Deep groove ball · 6309-2Z

radial — mediumaxial — low, on both sides
    Drawing of 6309-2Z: ⌀45 × ⌀100 × 25 mm6309-2Z2Z
    Fig. 1: 6309-2Z, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6309-2Z

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 6309-2Z

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    7 exact, 56 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    25 mm
    Width BRing width. Source: supplier data
    Seal
    2Zmetal shields on both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 45 × 100 × 25 from other brands

    63 products
    Series illustration (not a photo of this item): 6309-2Z
    You are viewingFAG 6309-2Z

    Everything the number specifies matches: series 63, 45 × 100 × 25 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the FAG catalogue.

    • Series illustration (not a photo of this item): 6309-2Z6309-2ZThis bearingFAG45 × 100 × 25available to orderon requestyou are here
    • Photo: 6309 ZZ6309 ZZCT45 × 100 × 251,157 pcs€3.91
    • Photo: 6309-2Z6309-2ZSKF45 × 100 × 2550 pcs€19.70
    • Photo: 6309 ZZ6309 ZZZ&S45 × 100 × 25available to order€9.14
    • Series illustration (not a photo of this item): 6309 ZZ6309 ZZKG45 × 100 × 25available to orderon request
    • Series illustration (not a photo of this item): 6309 ZZ6309 ZZNTE45 × 100 × 25available to orderon request
    • Series illustration (not a photo of this item): 6309 ZZ6309 ZZNTN/SNR45 × 100 × 25out of stockon request
    02

    Often bought with this

    shaft snap ring Ø45, bore snap ring Ø100, seal 45×100

    3 products
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    • Seal 45×100JULU 045-100-10 TCWhy it fits: Oil seal 45×100: shaft 45 and housing bore 100, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      €0.93available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    9 machines3 makesby parts catalogues

    1. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours: shields on both sides (ZZ); in the machine: open

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. KhTZ-16131, KhTZ-16331 KhTZ same geometry 1 assembly · 1 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open

      manufacturer’s catalogue: Tractors KhTZ-16131, KhTZ-16331. Operator’s manual 161.00.000 RE

    3. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus check the version 2 assemblies · 2 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; not decoded: mark “K” in the machine catalogue

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    4. Belarus 1523/​1523V/​1523.3 Belarus check the version 2 assemblies · 2 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; not decoded: mark “K” in the machine catalogue

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    5. KhTZ-2511, KhTZ-3510 KhTZ check the version 1 assembly · 2 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; not decoded: mark “K” in the machine catalogue

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    Number in the manufacturer’s catalogue: by GOST (80309) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 100d 45B 25
    d×D×Bsize 45 × 100 × 25mm

    Deep groove ball bearing 6309-ZZ, design 2Z: metal shields on both sides. Under GOST the same bearing is designated 80309.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80309?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0309 corresponds to the ISO base 6309. Size 45 × 100 × 25 mm, a full equivalent of 6309-ZZ.

    Will 6309 2Z C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet