+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6307-M-C3 · 35 × 80 × 21

Deep groove ball · 6307 M C3

radial — mediumaxial — low, on both sides
    Drawing of 6307 M C3: ⌀35 × ⌀80 × 21 mm6307 M C3
    Fig. 1: 6307 M C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6307-M-C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 6307-M-C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 66 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    21 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C3
    01

    Equivalents

    the same size 35 × 80 × 21 from other brands

    68 products
    Drawing: 6307 M C3
    You are viewingFAG 6307-M-C3

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6307 2RS C36307 2RS C3contact seals on both sides, standard designCT35 × 80 × 21143 pcs€2.18
    • Series illustration (not a photo of this item): 6307 2RS6307 2RScontact seals on both sides, normal clearance, standard designCT35 × 80 × 211,868 pcs€2.21
    • Cross-section drawing to size: Deep groove ball, 35 × 80 × 21 mm6307 2RS Ncontact seals on both sides, normal clearance, groove for a snap ringCT35 × 80 × 2180 pcs€2.35
    • Series illustration (not a photo of this item): 6307 2RSC36307 2RSC3contact seals on both sides, standard designNTE35 × 80 × 2140 pcs€3.36
    • Series illustration (not a photo of this item): 6307 2RS6307 2RScontact seals on both sides, normal clearance, standard designNTE35 × 80 × 21638 pcs€3.48
    • Series illustration (not a photo of this item): 6307 2RS6307 2RScontact seals on both sides, normal clearance, standard designKoyo35 × 80 × 2140 pcs€10.53
    • Series illustration (not a photo of this item): 6307 2RS C36307 2RS C3contact seals on both sides, standard designKoyo35 × 80 × 2140 pcs€10.53
    • Photo: 6307 2RSR C36307 2RSR C3contact seals on both sides, standard designFAG35 × 80 × 21260 pcs€10.85
    • Photo: 6307 2RS6307 2RScontact seals on both sides, normal clearance, standard designZ&S35 × 80 × 21available to order€5.48
    • Photo: 6307 2RSR6307 2RSRcontact seals on both sides, normal clearance, standard designFAG35 × 80 × 21available to order€9.84
    02

    Often bought with this

    seal 35×80, shaft snap ring Ø35, bore snap ring Ø80

    6 products
    • Seal 35×80JULU 035-80-10 TCWhy it fits: Oil seal 35×80: shaft 35 and housing bore 80, the same as the bearing
      €0.53250 pcs
    • Seal 35×80035-80-10Why it fits: Oil seal 35×80: shaft 35 and housing bore 80, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    7 machines2 makesby parts catalogues

    1. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN); ours has M

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    2. Belarus 922.3/​922.4 Belarus same geometry 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN); ours has M

      manufacturer’s catalogue: BELARUS 922.3/​922.4. 922-0000010 KDS. Catalogue of parts and assembly units, 2013 (RUE MTZ)

    3. Belarus-80Kh/​80Kh.1/​100Kh Belarus same geometry 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN); ours has M

      manufacturer’s catalogue: BELARUS-80Kh/​80Kh.1/​100Kh. 80Kh-0000010 KDS. Catalogue of assembly units and parts (RUE MTZ, 2012)

    4. Belarus 1523/​1523V/​1523.3 Belarus same geometry 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN); ours has M

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    5. Maschio/​Gaspardo DC Rapido (harrow drill) Maschio Gaspardo same geometry 1 assembly

      ours: open; in the machine: seals on both sides (2RS); ours has clearance C3; the machine takes normal (CN); ours has M

      manufacturer’s catalogue: maschio_dc---dc-rapido

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 80d 35B 21
    d×D×Bsize 35 × 80 × 21mm

    Deep groove ball bearing 6307 C3.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet