+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6304-C3 · 20 × 52 × 15

Deep groove ball · 6304 C3

radial — mediumaxial — low, on both sides
    Drawing of 6304 C3: ⌀20 × ⌀52 × 15 mm6304 C3
    Fig. 1: 6304 C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6304-C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 6304-C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    2 exact, 51 approximate
    d
    20 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    52 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    15 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C3
    01

    Equivalents

    the same size 20 × 52 × 15 from other brands

    53 products
    Series illustration (not a photo of this item): 6304 C3
    You are viewingFAG 6304-C3

    Everything the number specifies matches: series 63, 20 × 52 × 15 mm, open, no protection, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the FAG catalogue.

    • Series illustration (not a photo of this item): 6304 C36304 C3This bearingFAG20 × 52 × 15available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6304/C36304/C3SKF20 × 52 × 15available to orderon request
    02

    Often bought with this

    seal 20×52, shaft snap ring Ø20, bore snap ring Ø52

    6 products
    • Seal 20×52JULU 020-52-10 TCWhy it fits: Oil seal 20×52: shaft 20 and housing bore 52, the same as the bearing
      €0.392,570 pcs
    • Seal 20×52JULU 020-52-7 TCWhy it fits: Oil seal 20×52: shaft 20 and housing bore 52, the same as the bearing
      €0.391,300 pcs
    • Shaft snap ring Ø20CT SEG 20 Z by 1000Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      €22.57available to order
    • Shaft snap ring Ø20SEG 20 Z (100 pcs)Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø52CT SEG 52 W by 1000Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      €86.47available to order
    • Bore snap ring Ø52CT-RING SEG 52 W (100 pcs)Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    7 machines3 makesby parts catalogues

    1. Belarus-152 Belarus same geometry 4 assemblies · 4 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    2. Gaspardo Primavera (pneumatic seed drill) Maschio Gaspardo same geometry 2 assemblies

      ours: open; in the machine: shield on one side; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: maschio_primavera-2009

    3. Belarus 922.3/​922.4 Belarus same geometry 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 922.3/​922.4. 922-0000010 KDS. Catalogue of parts and assembly units, 2013 (RUE MTZ)

    4. KhTZ-2511, KhTZ-3510 KhTZ same geometry 1 assembly · 1 pcs per machine

      ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    5. Gaspardo Nina 250/​300/​400 (mechanical seed drill) Maschio Gaspardo same geometry 1 assembly

      ours: open; in the machine: shield on one side; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: maschio_nina-2015

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 52d 20B 15
    d×D×Bsize 20 × 52 × 15mm

    Deep groove ball bearing 6304 C3.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet