+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €2.93 per piece.
6302-2HRS · 15 × 42 × 13

Deep groove ball · 6302 2HRS

radial — mediumaxial — low, on both sides
    Drawing of 6302 2HRS: ⌀15 × ⌀42 × 13 mm6302 2HRS2HRS
    Fig. 1: 6302 2HRS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6302-2HRS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 6302-2HRS

    €3.55per piece incl. VAT
    In stock: 300 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    12 exact, 28 approximate
    d
    15 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    42 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    13 mm
    Width BRing width. Source: supplier data
    Seal
    2HRScontact seals on both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 15 × 42 × 13 from other brands

    41 products
    Series illustration (not a photo of this item): 6302 2HRS
    You are viewingFAG 6302-2HRS
    €3.55baseline for the price comparison

    Everything the number specifies matches: series 63, 15 × 42 × 13 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the FAG catalogue.

    • Series illustration (not a photo of this item): 6302 2HRS6302 2HRSThis bearingFAG15 × 42 × 13300 pcs€3.55you are here
    • Series illustration (not a photo of this item): 6302 2RS6302 2RSCT15 × 42 × 1311,963 pcs€0.50−€3.05
    • Series illustration (not a photo of this item): 6302 2RS6302 2RSNTE15 × 42 × 131,440 pcs€0.86−€2.69
    • Series illustration (not a photo of this item): 6302 2NSE6302 2NSENACHI15 × 42 × 13170 pcs€2.96−€0.59
    • Series illustration (not a photo of this item): 6302 2RS6302 2RSKoyo15 × 42 × 13118 pcs€3.52−€0.03
    • Photo: 6302 2RS6302 2RSKLT15 × 42 × 13available to order€0.50−€3.05
    • Series illustration (not a photo of this item): 6302-2RSH6302-2RSHSKF15 × 42 × 13available to order€3.91+€0.36
    • Series illustration (not a photo of this item): 6302 2RS6302 2RSno brand15 × 42 × 13available to orderon request
    • Series illustration (not a photo of this item): 6302 2RS6302 2RSFKL15 × 42 × 13out of stockon request
    • Series illustration (not a photo of this item): 6302 2RS6302 2RSKG15 × 42 × 13available to orderon request

    Under the price: the difference from the price of this bearing (€3.55).
    02

    Often bought with this

    shaft snap ring Ø15, bore snap ring Ø42, seal 15×42

    3 products
    • Shaft snap ring Ø15CT SEG 15 Z by 1000Why it fits: DIN 471 snap ring for a 15 shaft: holds the inner ring on the shaft
      €8.92out of stock
    • Bore snap ring Ø42CT SEG 42 W by 1000Why it fits: DIN 472 snap ring for a 42 bore: holds the outer ring in the housing
      €45.155 pcs
    • Seal 15×42JULU 015-42-7 TCWhy it fits: Oil seal 15×42: shaft 15 and housing bore 42, the same as the bearing; the bearing has its own seals (2HRS), and the oil seal closes the unit from outside
      €0.291,120 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Belarus-152 Belarus same geometry 2 assemblies · 3 pcs per machine

      ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    Number in the manufacturer’s catalogue: by GOST (180302) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 42d 15B 13
    d×D×Bsize 15 × 42 × 13mm

    Deep groove ball bearing 6302-2RS, design 2HRS: contact seals on both sides. Under GOST the same bearing is designated 180302.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180302?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0302 corresponds to the ISO base 6302. Size 15 × 42 × 13 mm, a full equivalent of 6302-2RS.

    Will 6302 2HRS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet