+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6234-M · 170 × 310 × 52

Deep groove ball · 6234 M

radial — mediumaxial — low, on both sides
    Drawing of 6234 M: ⌀170 × ⌀310 × 52 mm6234 M
    Fig. 1: 6234 M, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6234-M

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 6234-M

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 4 approximate
    d
    170 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    310 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    52 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 170 × 310 × 52 from other brands

    5 products
    Drawing: 6234 M
    You are viewingFAG 6234-M

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 62346234standard designDYZV170 × 310 × 52available to orderon request
    • Series illustration (not a photo of this item): 6234/C36234/C3clearance C3, standard designSKF170 × 310 × 52available to orderon request
    • Drawing: 6234 M C36234 M C3clearance C3FAG170 × 310 × 52available to orderon request
    • Drawing: 6234 MC46234 MC4clearance C4FAG170 × 310 × 52available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    D 310d 170B 52
    d×D×Bsize 170 × 310 × 52mm

    Deep groove ball bearing 6234. Under GOST the same bearing is designated 234.

    Frequently asked questions

    What is 234?

    It is the same bearing under GOST 3189-89: 234 corresponds to the ISO base 6234. Size 170 × 310 × 52 mm, a full equivalent of 6234.

    Will 6234 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet