+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
62202-2RSR · 15 × 35 × 14

Deep groove ball · 62202.2RSR

radial — mediumaxial — low, on both sides
    Drawing of 62202.2RSR: ⌀15 × ⌀35 × 14 mm62202.2RSR2RSR
    Fig. 1: 62202.2RSR, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 62202-2RSR

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 62202-2RSR

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    5 exact, 2 approximate
    d
    15 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    35 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    14 mm
    Width BRing width. Source: supplier data
    Seal
    2RSRcontact seals on both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 15 × 35 × 14 from other brands

    9 products
    Series illustration (not a photo of this item): 62202.2RSR
    You are viewingFAG 62202-2RSR

    Everything the number specifies matches: series 622, 15 × 35 × 14 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the FAG catalogue.

    • Series illustration (not a photo of this item): 62202.2RSR62202.2RSRThis bearingFAG15 × 35 × 14available to orderon requestyou are here
    • Series illustration (not a photo of this item): 62202 2RS62202 2RSCRAFT15 × 35 × 1418 pcs€0.73
    • Series illustration (not a photo of this item): 62202 2RS62202 2RSCT15 × 35 × 14available to order€0.73
    • Series illustration (not a photo of this item): 62202-2RS162202-2RS1SKF15 × 35 × 14available to order€10.70
    • Series illustration (not a photo of this item): 62202 2RS62202 2RSKG15 × 35 × 14available to orderon request
    02

    Often bought with this

    shaft snap ring Ø15, bore snap ring Ø35, seal 15×35

    5 products
    • Shaft snap ring Ø15CT SEG 15 Z by 1000Why it fits: DIN 471 snap ring for a 15 shaft: holds the inner ring on the shaft
      €8.92out of stock
    • Bore snap ring Ø35CT SEG 35 W by 1000Why it fits: DIN 472 snap ring for a 35 bore: holds the outer ring in the housing
      €40.62available to order
    • Bore snap ring Ø35SEG 35 W (100 pcs)Why it fits: DIN 472 snap ring for a 35 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 15×35JULU 015-35-7 TCWhy it fits: Oil seal 15×35: shaft 15 and housing bore 35, the same as the bearing; the bearing has its own seals (2RSR), and the oil seal closes the unit from outside
      €0.211,290 pcs
    • Seal 15×35JULU 015-35-10 TCWhy it fits: Oil seal 15×35: shaft 15 and housing bore 35, the same as the bearing; the bearing has its own seals (2RSR), and the oil seal closes the unit from outside
      €0.24available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    3 machines2 makesby parts catalogues

    1. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus check the version 1 assembly · 1 pcs per machine

      the machine has S9; ours does not; ours is P0; the machine takes P6; not decoded: mark “K1” in the machine catalogue

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus check the version 1 assembly · 1 pcs per machine

      the machine has S9; ours does not; ours is P0; the machine takes P6; not decoded: mark “K1” in the machine catalogue

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    3. KhTZ-2511, KhTZ-3510 KhTZ check the version 1 assembly · 1 pcs per machine

      the machine has S9; ours does not; ours is P0; the machine takes P6; not decoded: mark “K1” in the machine catalogue

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 35d 15B 14
    d×D×Bsize 15 × 35 × 14mm

    Deep groove ball bearing 62202-2RS, design 2RSR: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet