+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6214 · 70 × 125 × 24

Deep groove ball · 6214

radial — mediumaxial — low, on both sides
    Drawing of 6214: ⌀70 × ⌀125 × 24 mm6214
    Fig. 1: 6214, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6214

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 6214

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    6 exact, 22 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    125 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    24 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 70 × 125 × 24 from other brands

    28 products
    Photo: 6214
    You are viewingFAG 6214

    Everything the number specifies matches: series 62, 70 × 125 × 24 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the FAG catalogue.

    • Photo: 62146214This bearingFAG70 × 125 × 24available to orderon requestyou are here
    • Series illustration (not a photo of this item): 62146214CT70 × 125 × 24377 pcs€5.54
    • Series illustration (not a photo of this item): 62146214NTE70 × 125 × 2446 pcs€7.44
    • Photo: 62146214SKF70 × 125 × 245 pcs€44.47
    • Photo: 62146214FLT70 × 125 × 24available to order€15.34
    • Series illustration (not a photo of this item): 62146214KG70 × 125 × 24available to orderon request
    02

    Often bought with this

    seal 70×125, shaft snap ring Ø70, bore snap ring Ø125

    3 products
    • Seal 70×125JULU 070-125-10 TCWhy it fits: Oil seal 70×125: shaft 70 and housing bore 125, the same as the bearing
      €0.8782 pcs
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø125CT SEG 125 W by 100Why it fits: DIN 472 snap ring for a 125 bore: holds the outer ring in the housing
      €67.941 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines2 makesby parts catalogues

    1. KhTZ-2511, KhTZ-3510 KhTZ exactly this number 2 assemblies · 3 pcs per machine

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    2. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus check the version 1 assembly · 1 pcs per machine

      not set by the number: sealing

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (214) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 125d 70B 24
    d×D×Bsize 70 × 125 × 24mm

    Deep groove ball bearing 6214. Under GOST the same bearing is designated 214.

    Frequently asked questions

    What is 214?

    It is the same bearing under GOST 3189-89: 214 corresponds to the ISO base 6214. Size 70 × 125 × 24 mm, a full equivalent of 6214.

    Will 6214 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet