+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6208 N C3 · 40 × 80 × 18

Deep groove ball · 6208 N C3

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6208 N C3: ⌀40 × ⌀80 × 18 mm⌀80⌀40186208 N C3
    Fig. 1: 6208 N C3, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6208 N C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 6208 N C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 86 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    18 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C3
    01

    Equivalents

    the same size 40 × 80 × 18 from other brands

    87 products
    Series illustration (not a photo of this item): 6208 N C3
    You are viewingFAG 6208 N C3

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6208 2RS6208 2RScontact seals on both sides, normal clearance, standard designCT40 × 80 × 18176 pcs€1.67
    • Series illustration (not a photo of this item): 6208 2RS C36208 2RS C3contact seals on both sides, standard designNTE40 × 80 × 18480 pcs€2.69
    • Series illustration (not a photo of this item): 6208 2RS6208 2RScontact seals on both sides, normal clearance, standard designNTE40 × 80 × 181,692 pcs€2.80
    • Cross-section drawing to size: Deep groove ball, 40 × 80 × 18 mmK 6208 2RScontact seals on both sides, K: not decodedCT40 × 80 × 18294 pcs€2.94
    • Drawing: SS 6208 2RSSS 6208 2RScontact seals on both sides, normal clearance, stainless steelCT40 × 80 × 1849 pcs€8.13
    • Series illustration (not a photo of this item): 6208 2NSE6208 2NSEcontact seals on both sides, normal clearance, standard designNACHI40 × 80 × 1835 pcs€8.19
    • Series illustration (not a photo of this item): 6208 2HRS6208 2HRScontact seals on both sides, normal clearance, standard designFAG40 × 80 × 1898 pcs€8.60
    • Series illustration (not a photo of this item): 6208 2RSR C36208 2RSR C3contact seals on both sides, standard designFAG40 × 80 × 18190 pcs€9.17
    • Series illustration (not a photo of this item): 6208 2RS C36208 2RS C3contact seals on both sides, standard designKoyo40 × 80 × 1885 pcs€9.69
    • Series illustration (not a photo of this item): 6208 2RSCM6208 2RSCMcontact seals on both sides, clearance CM, standard designKoyo40 × 80 × 1850 pcs€10.91
    02

    Often bought with this

    seal 40×80, shaft snap ring Ø40, bore snap ring Ø80

    6 products
    • Seal 40×80JULU 040-80-7 TCWhy it fits: Oil seal 40×80: shaft 40 and housing bore 80, the same as the bearing
      €0.53770 pcs
    • Seal 40×80JULU 040-80-10 TCWhy it fits: Oil seal 40×80: shaft 40 and housing bore 80, the same as the bearing
      €0.54463 pcs
    • Shaft snap ring Ø40CT SEG 40 Z by 1000Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      €54.16available to order
    • Shaft snap ring Ø40SEG 40 Z (100 pcs)Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    24 machines4 makesby parts catalogues

    1. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 6 assemblies · 7 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN); ours has snap ring groove (N)

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    2. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus same geometry 4 assemblies · 5 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN); ours has snap ring groove (N)

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    3. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 3 assemblies · 4 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN); ours has snap ring groove (N)

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    4. Belarus 821/​921 (821.2/​821.3/​921.2/​921.3) Belarus same geometry 3 assemblies · 4 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN); ours has snap ring groove (N)

      manufacturer’s catalogue: BELARUS 821/​921. 921-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    5. Belarus-80Kh/​80Kh.1/​100Kh Belarus same geometry 3 assemblies · 3 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN); ours has snap ring groove (N)

      manufacturer’s catalogue: BELARUS-80Kh/​80Kh.1/​100Kh. 80Kh-0000010 KDS. Catalogue of assembly units and parts (RUE MTZ, 2012)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 80d 40B 18
    d×D×Bsize 40 × 80 × 18mm

    Deep groove ball bearing 6208 C3.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet