+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
61911 · 55 × 80 × 13

Deep groove ball · 61911

radial — mediumaxial — low, on both sides
    Drawing of 61911: ⌀55 × ⌀80 × 13 mm61911
    Fig. 1: 61911, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 61911

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 61911

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    1 exact, 9 approximate
    d
    55 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    13 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 55 × 80 × 13 from other brands

    10 products
    Drawing: 61911
    You are viewingFAG 61911

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6911 / 61911 2RS6911 / 61911 2RScontact seals on both sidesCT55 × 80 × 13352 pcs€2.53
    • Series illustration (not a photo of this item): 6911 2RS6911 2RScontact seals on both sidesKoyo55 × 80 × 1313 pcs€31.35
    • Series illustration (not a photo of this item): 6911 2RS6911 2RScontact seals on both sidesno brand55 × 80 × 13available to orderon request
    • Series illustration (not a photo of this item): 61911 2RS61911 2RScontact seals on both sidesCT55 × 80 × 13available to orderon request
    • Series illustration (not a photo of this item): 6911 2RS6911 2RScontact seals on both sidesCT55 × 80 × 13available to orderon request
    • Series illustration (not a photo of this item): 6911 DDU6911 DDUcontact seals on both sidesNSK55 × 80 × 13available to orderon request
    • Series illustration (not a photo of this item): 61911-2RS161911-2RS1contact seals on both sidesSKF55 × 80 × 13available to orderon request
    • Series illustration (not a photo of this item): 6911 ZZ CM6911 ZZ CMmetal shields on both sides, clearance CMNSK55 × 80 × 13available to orderon request
    • Drawing: 6911CM 56911CM 5clearance CM, 5NSK55 × 80 × 13available to orderon request
    02

    Often bought with this

    seal 55×80, shaft snap ring Ø55, bore snap ring Ø80

    5 products
    • Seal 55×80JULU 055-80-12 TCWhy it fits: Oil seal 55×80: shaft 55 and housing bore 80, the same as the bearing
      €0.44534 pcs
    • Seal 55×80JULU 055-80-10 SCWhy it fits: Oil seal 55×80: shaft 55 and housing bore 80, the same as the bearing
      €0.47460 pcs
    • Shaft snap ring Ø55CT SEG 55 Z by1000Why it fits: DIN 471 snap ring for a 55 shaft: holds the inner ring on the shaft
      €125.77available to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 80d 55B 13
    d×D×Bsize 55 × 80 × 13mm

    Deep groove ball bearing 61911. Under GOST the same bearing is designated 1000911.

    Frequently asked questions

    What is 1000911?

    It is the same bearing under GOST 3189-89: 1000911 corresponds to the ISO base 61911. Size 55 × 80 × 13 mm, a full equivalent of 61911.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet