+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
61908-2RSR · 40 × 62 × 12

Deep groove ball · 61908 2RSR

radial — mediumaxial — low, on both sides
    Drawing of 61908 2RSR: ⌀40 × ⌀62 × 12 mm61908 2RSR2RSR
    Fig. 1: 61908 2RSR, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 61908-2RSR

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 61908-2RSR

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    7 exact, 9 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    12 mm
    Width BRing width. Source: supplier data
    Seal
    2RSRcontact seals on both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 40 × 62 × 12 from other brands

    16 products
    Series illustration (not a photo of this item): 61908 2RSR
    You are viewingFAG 61908-2RSR

    Everything the number specifies matches: series 619, 40 × 62 × 12 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the FAG catalogue.

    • Series illustration (not a photo of this item): 61908 2RSR61908 2RSRThis bearingFAG40 × 62 × 12available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6908 / 61908 2RS6908 / 61908 2RSCT40 × 62 × 121,511 pcs€1.22
    • Series illustration (not a photo of this item): 6908 2RS6908 2RSCT40 × 62 × 12available to order€1.31
    • Series illustration (not a photo of this item): 6908 2RS6908 2RSno brand40 × 62 × 12available to orderon request
    • Series illustration (not a photo of this item): 61908 2RS61908 2RSCT40 × 62 × 12available to orderon request
    • Series illustration (not a photo of this item): 6908 2NSE6908 2NSENACHI40 × 62 × 12available to orderon request
    • Series illustration (not a photo of this item): 61908-2RS161908-2RS1SKF40 × 62 × 12available to orderon request
    02

    Often bought with this

    shaft snap ring Ø40, bore snap ring Ø62, seal 40×62

    5 products
    • Shaft snap ring Ø40CT SEG 40 Z by 1000Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      €54.16available to order
    • Shaft snap ring Ø40SEG 40 Z (100 pcs)Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    • Seal 40×62JULU 040-62-10 TCWhy it fits: Oil seal 40×62: shaft 40 and housing bore 62, the same as the bearing; the bearing has its own seals (2RSR), and the oil seal closes the unit from outside
      €0.425,110 pcs
    • Seal 40×62JULU 040-62-7 TCWhy it fits: Oil seal 40×62: shaft 40 and housing bore 62, the same as the bearing; the bearing has its own seals (2RSR), and the oil seal closes the unit from outside
      €0.421,543 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 62d 40B 12
    d×D×Bsize 40 × 62 × 12mm

    Deep groove ball bearing 61908-2RS, design 2RSR: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet