+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6040-M · 200 × 310 × 51

Deep groove ball · 6040-M

radial — mediumaxial — low, on both sides
    Drawing of 6040-M: ⌀200 × ⌀310 × 51 mm6040-M
    Fig. 1: 6040-M, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6040-M

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 6040-M

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 3 approximate
    d
    200 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    310 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    51 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 200 × 310 × 51 from other brands

    5 products
    Drawing: 6040-M
    You are viewingFAG 6040-M

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 60406040standard designDYZV200 × 310 × 51available to orderon request
    • Drawing: 6040 M C36040 M C3clearance C3FAG200 × 310 × 51available to orderon request
    • Drawing: 6040M.C46040M.C4clearance C4FAG200 × 310 × 51available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    D 310d 200B 51
    d×D×Bsize 200 × 310 × 51mm

    Deep groove ball bearing 6040. Under GOST the same bearing is designated 140.

    Frequently asked questions

    What is 140?

    It is the same bearing under GOST 3189-89: 140 corresponds to the ISO base 6040. Size 200 × 310 × 51 mm, a full equivalent of 6040.

    Will 6040 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet